[U-Boot] [PATCH 1/4] mx6cuboxi: Add HDMI output support

[Tom Rini]

On Mon, Apr 27, 2015 at 11:30:41PM -0300, Fabio Estevam wrote:

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Add HDMI output using PLL5 as the source for the IPU DI clocks,
> and accurate VESA timings.
> 
> These settings are based on the patch from Soeren Moch <smoch at web.de>
> submitted for the tbs2910 mx6 based board.
> 
> It allows the display to work properly at 1024x768 at 60.
> 
> This should make the hdmi output signal compatible with most if not all
> modern displays.
> 
> Signed-off-by: Jon Nettleton <jon.nettleton at gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Reviewed-by: Tom Rini <trini at konsulko.com>
Tested-by: Tom Rini <trini at konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150428/b106dbd9/attachment.sig>