[U-Boot] [PATCH 2/4] mx6cuboxi: Add USB host support

Fabio Estevam festevam at gmail.com
Tue Apr 28 17:20:46 CEST 2015


On Tue, Apr 28, 2015 at 12:11 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Tom,
>
> On Tue, Apr 28, 2015 at 11:48 AM, Tom Rini <trini at konsulko.com> wrote:
>
>> Since we have FEC do we really need to add ASIX as well?  Also, what
>
> I can remove it if needed. Just kept the same as done in the Solidrun's U-boot.
>
>> devices did you test this with for USB?  I grabbed a Sandisk USB drive
>> and on the i2eX I have, the bottom USB port doesn't see it and on the
>> top I get:
>> scanning bus 1 for devices... failed to set default configuration len 0,
>> status 80000000
>
> I tested with USB pen drive and USB keyboard and it could recognize them.
>
> Only the bottom top works for me and the same is seen on Solidrun's U-boot.

Ops, I mean "Only the bottom USB port works for me".


More information about the U-Boot mailing list