[U-Boot] [PATCH 8/8] sunxi: ehci: Convert to the driver-model

Hans de Goede hdegoede at redhat.com
Thu Apr 30 16:35:24 CEST 2015


Convert sunxi-boards which use the sunxi-ehci code to the driver-model.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 board/sunxi/Kconfig           |  3 ++
 drivers/usb/host/ehci-sunxi.c | 95 ++++++++++++++++++++++++++++++-------------
 2 files changed, 69 insertions(+), 29 deletions(-)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 18e5561..6dcbff3 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -559,4 +559,7 @@ config DM_ETH
 config DM_SERIAL
 	default y
 
+config DM_USB
+	default y if !USB_MUSB_SUNXI
+
 endif
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 0edb643..9c6703c 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -14,53 +14,90 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/usb_phy.h>
 #include <asm/io.h>
+#include <dm.h>
 #include "ehci.h"
 
-int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
-		struct ehci_hcor **hcor)
+struct ehci_sunxi_priv {
+	struct ehci_ctrl ehci;
+	int ahb_gate_mask;
+	int phy_index;
+};
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+	return 0;
+}
+
+static int ehci_usb_probe(struct udevice *dev)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-	int ahb_gate_offset;
+	struct usb_platdata *plat = dev_get_platdata(dev);
+	struct ehci_sunxi_priv *priv = dev_get_priv(dev);
+	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
+	struct ehci_hcor *hcor;
+
+	if (hccr == (void *)SUNXI_USB1_BASE) {
+		priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
+		priv->phy_index = 1;
+	} else {
+		priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1;
+		priv->phy_index = 2;
+	}
 
-	ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
-				  AHB_GATE_OFFSET_USB_EHCI0;
-	setbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
+	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-	setbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
+	setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
 #endif
 
-	sunxi_usb_phy_init(index + 1);
-	sunxi_usb_phy_power_on(index + 1);
+	sunxi_usb_phy_init(priv->phy_index);
+	sunxi_usb_phy_power_on(priv->phy_index);
 
-	if (index == 0)
-		*hccr = (void *)SUNXI_USB1_BASE;
-	else
-		*hccr = (void *)SUNXI_USB2_BASE;
+	hcor = (struct ehci_hcor *)((uint32_t)hccr +
+				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
-				+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	debug("sunxi-ehci: init hccr %x and hcor %x hc_length %d\n",
-	      (uint32_t)*hccr, (uint32_t)*hcor,
-	      (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	return 0;
+	return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type);
 }
 
-int ehci_hcd_stop(int index)
+static int ehci_usb_remove(struct udevice *dev)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-	int ahb_gate_offset;
+	struct ehci_sunxi_priv *priv = dev_get_priv(dev);
+	int ret;
 
-	sunxi_usb_phy_power_off(index + 1);
-	sunxi_usb_phy_exit(index + 1);
+	ret = ehci_deregister(dev);
+	if (ret)
+		return ret;
+
+	sunxi_usb_phy_power_off(priv->phy_index);
+	sunxi_usb_phy_exit(priv->phy_index);
 
-	ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
-				  AHB_GATE_OFFSET_USB_EHCI0;
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
+	clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
 #endif
-	clrbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
+	clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
 
 	return 0;
 }
+
+static const struct udevice_id ehci_usb_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-ehci", },
+	{ .compatible = "allwinner,sun5i-a13-ehci", },
+	{ .compatible = "allwinner,sun6i-a31-ehci", },
+	{ .compatible = "allwinner,sun7i-a20-ehci", },
+	{ .compatible = "allwinner,sun8i-a23-ehci", },
+	{ .compatible = "allwinner,sun9i-a80-ehci", },
+	{ }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+	.name	= "ehci_sunxi",
+	.id	= UCLASS_USB,
+	.of_match = ehci_usb_ids,
+	.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+	.probe = ehci_usb_probe,
+	.remove = ehci_usb_remove,
+	.ops	= &ehci_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
+	.priv_auto_alloc_size = sizeof(struct ehci_sunxi_priv),
+	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+};
-- 
2.3.6



More information about the U-Boot mailing list