[U-Boot] [PATCH v3] arm: ls2080a: Add sata support on qds and rdb board

[Yuantian Tang]

I have sent the newer version of this patch: http://patchwork.ozlabs.org/patch/549883/

Please have a review.

Regards,
Yuantian

> -----Original Message-----
> From: York Sun [mailto:yorksun at freescale.com]
> Sent: Tuesday, December 01, 2015 3:41 AM
> To: Tang Yuantian-B29983 <Yuantian.Tang at freescale.com>
> Cc: u-boot at lists.denx.de; Kushwaha Prabhakar-B32579
> <prabhakar at freescale.com>; Wang Huan-B18965
> <alison.wang at freescale.com>
> Subject: Re: [PATCH v3] arm: ls2080a: Add sata support on qds and rdb board
> 
> 
> 
> On 10/23/2015 12:16 AM, Tang Yuantian wrote:
> > Freescale ARM-based Layerscape LS2080A contain a SATA controller which
> > comply with the serial ATA 3.0 specification and the AHCI 1.3
> > specification.
> > This patch adds SATA feature on ls2080aqds and ls2080ardb boards.
> >
> > Signed-off-by: Tang Yuantian <Yuantian.Tang at freescale.com>
> > ---
> > depends on patches:
> > http://patchwork.ozlabs.org/patch/530576/
> > 	armv8: LS2080A: Rename LS2085A to reflect LS2080A
> > http://patchwork.ozlabs.org/patch/530575/
> > 	armv8: ls2085a: Add support of LS2085A SoC
> > v3:
> > 	- rename ls2085a to ls2080a
> > 	- rebase to the latest git tree
> > 	- replace the magic number with micro variable
> > v2:
> > 	- rebase to the latest git tree
> >
> 
> Yuantian,
> 
> The dependency patches have been updated and merged. Please rebase
> your patch and test on the new base git://git.denx.de/u-boot-fsl-qoriq.git
> master.
> 
> Thanks.
> 
> York