[U-Boot] [PATCH 1/2] rockchip: add CONFIG_SPL_ROCKCHIP_SERIAL

hl hl at rock-chips.com
Tue Dec 1 07:51:57 CET 2015


Hi Simon,

On 27/11/15 11:37, Simon Glass wrote:
> Hi Lin,
>
> On 26 November 2015 at 19:35, Simon Glass <sjg at chromium.org> wrote:
>> Hi Lin,
>>
>> On 19 November 2015 at 22:58, Lin Huang <hl at rock-chips.com> wrote:
>>> we can use this config to disable rockchip serial driver in SPL stage,
>>> since some rockchip soc sram size is small(rk3036 etc), so we don't
>>> want rockchip serial driver build in SPL, but we still want use common
>>> debug driver in SPL.
>>>
>>> Signed-off-by: Lin Huang <hl at rock-chips.com>
>>> ---
>>>   arch/arm/mach-rockchip/Kconfig  | 3 +++
>>>   drivers/serial/Makefile         | 2 +-
>>>   include/configs/rk3288_common.h | 1 +
>>>   3 files changed, 5 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
>>> index ccff81a..595263c 100644
>>> --- a/arch/arm/mach-rockchip/Kconfig
>>> +++ b/arch/arm/mach-rockchip/Kconfig
>>> @@ -59,6 +59,9 @@ config DM_GPIO
>>>   config ROCKCHIP_SERIAL
>>>          default y
>>>
>>> +config SPL_ROCKCHIP_SERIAL
>>> +       default n
>>> +
>> It will already default to 'n', so this can be omitted.
>>
>> Also you should add this new CONFIG to drivers/serial/Kconfig, below
>> the existing (non-SPL) one.
>>
>>>   source "arch/arm/mach-rockchip/rk3288/Kconfig"
>>>   source "arch/arm/mach-rockchip/rk3036/Kconfig"
>>>   endif
>>> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
>>> index 1818c7c..73e30c6 100644
>>> --- a/drivers/serial/Makefile
>>> +++ b/drivers/serial/Makefile
>>> @@ -41,7 +41,7 @@ obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
>>>   obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
>>>   obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
>>>   obj-$(CONFIG_MXS_AUART) += mxs_auart.o
>>> -obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
>>> +obj-$(CONFIG_$(SPL_)ROCKCHIP_SERIAL) += serial_rockchip.o
>>>   obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
>>>   obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
>>>   obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
>>> diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
>>> index 74c7ee1..7f3d1ee 100644
>>> --- a/include/configs/rk3288_common.h
>>> +++ b/include/configs/rk3288_common.h
>>> @@ -30,6 +30,7 @@
>>>   #define CONFIG_SPL_LIBCOMMON_SUPPORT
>>>   #define CONFIG_SPL_LIBGENERIC_SUPPORT
>>>   #define CONFIG_SPL_SERIAL_SUPPORT
>>> +#define CONFIG_SPL_ROCKCHIP_SERIAL
>> You should add this to the rk3288 defconfig files, instead of here.
>> Kconfig items should not be added to config header files - in fact we
>> plan to eventually remove the config header files.
>>
>>>   #define CONFIG_SYS_NS16550
>>>   #define CONFIG_SYS_NS16550_MEM32
>>>   #define CONFIG_SPL_BOARD_INIT
>>> --
>>> 1.9.1
>>>
> Actually, serial_rockchip.c has been removed in mainline. So you may
> not need this patch, or maybe it can be reduced in size. Please check
> the current u-boot-rockchip/master.
     i cherry-pick the

     [PATCH 2/2] rockchip: rk3036: enable CONFIG_DEBUG_UART, and use 
ns16550 uart driver

     in u-boot-rockchip/master branch, build it,  but fail, it is will 
call hang() in arch/arm/lib/div0,
     so i need to define  CONFIG_SPL_LIBGENERIC_SUPPORT, but if i do it, 
the spl size too big.
> Regards,
> Simon
>
>
>

-- 
Lin Huang




More information about the U-Boot mailing list