[U-Boot] [PATCH v2 2/2] altera_qspi: fix erase and write error code

[Thomas Chou]

Fix erase and write error code, which should be "protected".

>From the "Embedded Peripherals IP User Guide" of Altera,

The "Illegal write" flag indicates that a write instruction is
targeting a protected sector on the flash memory. This bit is
set to indicate that the IP has cancelled a write instruction.

The "Illegal erase" flag indicates that an erase instruction has
been set to a protected sector on the flash memory. This bit is
set to indicate that the IP has cancelled the erase instruction.

Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
v2
  add description as suggested by Marek.

 drivers/mtd/altera_qspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/altera_qspi.c b/drivers/mtd/altera_qspi.c
index 61a6a5e..617bf5d 100644
--- a/drivers/mtd/altera_qspi.c
+++ b/drivers/mtd/altera_qspi.c
@@ -85,7 +85,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	instr.len = mtd->erasesize * (s_last + 1 - s_first);
 	ret = mtd_erase(mtd, &instr);
 	if (ret)
-		return ERR_NOT_ERASED;
+		return ERR_PROTECTED;
 
 	return 0;
 }
@@ -102,7 +102,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 
 	ret = mtd_write(mtd, to, cnt, &retlen, src);
 	if (ret)
-		return ERR_NOT_ERASED;
+		return ERR_PROTECTED;
 
 	return 0;
 }
-- 
2.5.0