[U-Boot] [PATCH 1/3] zynq: sdhci: Remove zynq_sdhci_of_init()

[Michal Simek]

Prepare for using DM.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/mach-zynq/include/mach/sys_proto.h |  1 -
 drivers/mmc/zynq_sdhci.c                    | 27 ---------------------------
 2 files changed, 28 deletions(-)

diff --git a/arch/arm/mach-zynq/include/mach/sys_proto.h b/arch/arm/mach-zynq/include/mach/sys_proto.h
index 9d50e2478f61..151b903aa188 100644
--- a/arch/arm/mach-zynq/include/mach/sys_proto.h
+++ b/arch/arm/mach-zynq/include/mach/sys_proto.h
@@ -21,7 +21,6 @@ extern unsigned int zynq_get_silicon_version(void);
 
 /* Driver extern functions */
 extern int zynq_sdhci_init(phys_addr_t regbase);
-extern int zynq_sdhci_of_init(const void *blob);
 
 extern void ps7_init(void);
 
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 2d6cb31e12ee..87a1f4086fc4 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -32,30 +32,3 @@ int zynq_sdhci_init(phys_addr_t regbase)
 	add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, 0);
 	return 0;
 }
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int zynq_sdhci_of_init(const void *blob)
-{
-	int offset = 0;
-	u32 ret = 0;
-	phys_addr_t reg;
-
-	debug("ZYNQ SDHCI: Initialization\n");
-
-	do {
-		offset = fdt_node_offset_by_compatible(blob, offset,
-					"arasan,sdhci-8.9a");
-		if (offset != -1) {
-			reg = fdtdec_get_addr(blob, offset, "reg");
-			if (reg != FDT_ADDR_T_NONE) {
-				ret |= zynq_sdhci_init(reg);
-			} else {
-				debug("ZYNQ SDHCI: Can't get base address\n");
-				return -1;
-			}
-		}
-	} while (offset != -1);
-
-	return ret;
-}
-#endif
-- 
1.9.1