[U-Boot] [PATCHv2 9/9] arm: socfpga: remove building scan manager

[dinguyen at opensource.altera.com]

From: Dinh Nguyen <dinguyen at opensource.altera.com>

The scan manager is not needed for the Arria10. Edit the makefile to
build the scan manager for arria5 and cyclone5 only.

Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
---
 arch/arm/mach-socfpga/Makefile | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 316b326..d4c5a42 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -8,11 +8,14 @@
 #
 
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
-	   fpga_manager.o scan_manager.o
+	   fpga_manager.o
+
 obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
 
+ifneq ($(CONFIG_TARGET_SOCFPGA_ARRIA10),y)
 # QTS-generated config file wrappers
-obj-y	+= wrap_pll_config.o
+obj-y	+= scan_manager.o wrap_pll_config.o
+endif
 obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
 			   wrap_sdram_config.o
 CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
-- 
2.6.2