[U-Boot] [PATCH] arm: socfpga: arria10: add additional i2c nodes for Arria10

[Marek Vasut]

On Tuesday, December 01, 2015 at 06:12:32 PM, Stefan Roese wrote:
> On 01.12.2015 17:41, dinguyen at opensource.altera.com wrote:
> > From: Dinh Nguyen <dinguyen at opensource.altera.com>
> > 
> > Add remaining 3 I2C base addresses for the Arria10.
> > 
> > Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> > ---
> > 
> >   arch/arm/mach-socfpga/include/mach/base_addr_a10.h | 4 ++++
> >   1 file changed, 4 insertions(+)
> > 
> > diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h index
> > a7056d4..8653dd5 100644
> > --- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > +++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > @@ -29,6 +29,10 @@
> > 
> >   #define SOCFPGA_MPUL2_ADDRESS			0xfffff000
> >   #define SOCFPGA_I2C0_ADDRESS			0xffc02200
> >   #define SOCFPGA_I2C1_ADDRESS			0xffc02300
> > 
> > +#define SOCFPGA_I2C2_ADDRESS			0xffc02400
> > +#define SOCFPGA_I2C3_ADDRESS			0xffc02500
> > +#define SOCFPGA_I2C4_ADDRESS			0xffc02600
> > +
> > 
> >   #define SOCFPGA_ECC_OCRAM_ADDRESS		0xff8c3000
> >   #define SOCFPGA_UART0_ADDRESS			0xffc02000
> 
> Nitpicking, but there seems to be one empty line too much
> added above.
> 
> Other than this:
> 
> Reviewed-by: Stefan Roese <sr at denx.de>
> 
> BTW: Is anyone working on DM conversion of this I2C driver? All
> those macros for the base addresses would not be needed then.

Fixed and applied.

Best regards,
Marek Vasut