[U-Boot] [PATCH] serial: zynq: Fix incorrect referce to s5p driver

Michal Simek michal.simek at xilinx.com
Wed Dec 2 12:52:04 CET 2015


Remove this c&p error from s5p driver.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/serial/Kconfig       | 2 +-
 drivers/serial/serial_zynq.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e57c9ceb18ec..353fd2d25063 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -102,7 +102,7 @@ config DEBUG_UART_UARTLITE
 config DEBUG_UART_ZYNQ
 	bool "Xilinx Zynq"
 	help
-	  Select this to enable a debug UART using the serial_s5p driver. You
+	  Select this to enable a debug UART using the serial_zynq driver. You
 	  will need to provide parameters to make this work. The driver will
 	  be available until the real driver-model serial is running.
 
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 88bebed23638..6807f0f812f5 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -180,7 +180,7 @@ static const struct udevice_id zynq_serial_ids[] = {
 	{ }
 };
 
-U_BOOT_DRIVER(serial_s5p) = {
+U_BOOT_DRIVER(serial_zynq) = {
 	.name	= "serial_zynq",
 	.id	= UCLASS_SERIAL,
 	.of_match = zynq_serial_ids,
-- 
1.9.1



More information about the U-Boot mailing list