[U-Boot] [PATCHv3 3/9] arm: socfpga: arria10: add reset manager for Arria10

Marek Vasut marex at denx.de
Wed Dec 2 15:17:17 CET 2015


On Wednesday, December 02, 2015 at 07:12:50 AM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen at opensource.altera.com>
> 
> Add the defines for the reset manager and some basic reset functionality.
> 
> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> ---
> v3: remove duplicate reset function
>     use CONFIG_SOCFPGA_GEN5
> v2: integrate into a5/c5 reset manager

[...]

> @@ -26,13 +28,25 @@ void socfpga_per_reset(u32 reset, int set)
>  	if (RSTMGR_BANK(reset) == 0)
>  		reg = &reset_manager_base->mpu_mod_reset;
>  	else if (RSTMGR_BANK(reset) == 1)
> +#if defined(CONFIG_SOCFPGA_GEN5)
>  		reg = &reset_manager_base->per_mod_reset;
> +#else
> +		reg = &reset_manager_base->per0_mod_reset;
> +#endif

The other option would be to just rename these registers for in
struct socfpga_reset_manager {} and you won't need those ifdefs.

>  	else if (RSTMGR_BANK(reset) == 2)
> +#if defined(CONFIG_SOCFPGA_GEN5)
>  		reg = &reset_manager_base->per2_mod_reset;
> +#else
> +		reg = &reset_manager_base->per1_mod_reset;
> +#endif

Same here.

>  	else if (RSTMGR_BANK(reset) == 3)
>  		reg = &reset_manager_base->brg_mod_reset;
>  	else if (RSTMGR_BANK(reset) == 4)
> +#if defined(CONFIG_SOCFPGA_GEN5)
>  		reg = &reset_manager_base->misc_mod_reset;
> +#else
> +		reg = &reset_manager_base->sys_mod_reset;
> +#endif

I'd just add a comment that misc_mod_reset is sys_mod_reset on gen10 and
also rename it.

>  	else	/* Invalid reset register, do nothing */
>  		return;
> 
> @@ -46,13 +60,29 @@ void socfpga_per_reset(u32 reset, int set)
>   * Assert reset on every peripheral but L4WD0.
>   * Watchdog must be kept intact to prevent glitches
>   * and/or hangs.
> + * For the Arria10, we disable all the peripherals except L4 watchdog0,
> + * L4 Timer 0, and ECC.
>   */
>  void socfpga_per_reset_all(void)
>  {
> +#if defined(CONFIG_SOCFPGA_GEN5)
>  	const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
> 
>  	writel(~l4wd0, &reset_manager_base->per_mod_reset);
>  	writel(0xffffffff, &reset_manager_base->per2_mod_reset);
> +#else
> +	const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(WD0)) |
> +			(1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
> +
> +	unsigned mask_ecc_ocp = 0x0000FF00;
> +
> +	/* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
> +	writel(~l4wd0, &reset_manager_base->per1_mod_reset);
> +	setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp);
> +
> +	/* Finally disable the ECC_OCP */
> +	setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp);
> +#endif
>  }
> 
>  /*

[...]


More information about the U-Boot mailing list