[U-Boot] mmc erase fails from U-Boot command line

[Michael Trimarchi]

Hi

On Wed, Dec 2, 2015 at 7:52 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Eric,
>
> On Wed, Dec 2, 2015 at 4:47 PM, Eric Nelson <eric at nelint.com> wrote:
>> Sure. It's a hack, but shows where we're hitting the problem
>> (with the stop command).
>>
>> We haven't been using the "mmc erase" command, but see this when
>> using ums to program eMMC.
>
> Ok, applied your patch, but still get:
>
> => mmc erase 4000 1000
>
> MMC erase: dev # 2, block # 16384, count 4096 ... Timeout waiting for DAT0 to go
>  high!
> mmc erase failed
> 0 blocks erased: ERROR
> =>
>

Can you print the sysctl & 0xF? I want to check if this workaround is
really applied

Michael


> Thanks
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |