[U-Boot] [PATCH] net: eth_designware: select PHYLIB in Kconfig
Thomas Chou
thomas at wytron.com.tw
Sun Dec 6 14:19:56 CET 2015
Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.
This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
are selected.
Reported-by: Pavel Machek <pavel at denx.de>
Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
drivers/net/Kconfig | 1 +
include/configs/axs101.h | 1 -
include/configs/bf609-ezkit.h | 1 -
include/configs/galileo.h | 1 -
include/configs/socfpga_common.h | 1 -
include/configs/spear-common.h | 1 -
include/configs/stv0991.h | 1 -
include/configs/sunxi-common.h | 1 -
include/configs/tb100.h | 1 -
include/configs/x600.h | 1 -
10 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a03a95d..4b04d09 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW
config ETH_DESIGNWARE
bool "Synopsys Designware Ethernet MAC"
+ select PHYLIB
help
This MAC is present in SoCs from various vendors. It supports
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index 650d97d..eeb2ae6 100644
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -95,7 +95,6 @@
/*
* Ethernet PHY configuration
*/
-#define CONFIG_PHYLIB
#define CONFIG_MII
#define CONFIG_PHY_GIGE
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 0e353b9..b5d4847 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -75,7 +75,6 @@
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_CMD_MII
#define CONFIG_MII
-#define CONFIG_PHYLIB
/* i2c Settings */
#define CONFIG_SYS_I2C
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index eb16a5e..14a42b1 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -45,7 +45,6 @@
/* 10/100M Ethernet support */
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_ALTDESCRIPTOR
-#define CONFIG_PHYLIB
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index b3f65b6..86eccba 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -105,7 +105,6 @@
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
-#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 1d69477..d2630f4 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -17,7 +17,6 @@
/* Ethernet driver configuration */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index 14c6a9e..f421321 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -53,7 +53,6 @@
/* GMAC related configs */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_PHY_MICREL
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 98a2c74..31a68ac 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -312,7 +312,6 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
#define CONFIG_PHY_ADDR 1
#define CONFIG_MII /* MII PHY management */
-#define CONFIG_PHYLIB
#endif
#ifdef CONFIG_USB_EHCI_HCD
diff --git a/include/configs/tb100.h b/include/configs/tb100.h
index 8660ed4..e06484f 100644
--- a/include/configs/tb100.h
+++ b/include/configs/tb100.h
@@ -42,7 +42,6 @@
/*
* Ethernet PHY configuration
*/
-#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
/*
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 58f1aca..0263c50 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -77,7 +77,6 @@
/* Ethernet config options */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
--
2.5.0
More information about the U-Boot
mailing list