[U-Boot] [GIT PULL] Zynq changes

[Michal Simek]

Hi Tom,

please pull these changes. It is moving GEM to DM and fixes problems
with SPL. The last three patches are fixing MANUAL_RELOC and enabling
SPL_SIMPLE_BUS by default.

Thanks,
Michal

The following changes since commit 75507d5d5496a691aecb731f87d4d8d5cdf62b77:

  am33xx: Update serial pdata (2015-12-06 16:38:05 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 8bebf03c73cd0830cb2cd234021004cde67c6412:

  dm: core: Enable SPL_SIMPLE_BUS by default (2015-12-07 10:14:30 +0100)

----------------------------------------------------------------
Michal Simek (27):
      ARM: zynq: Remove PHYLIB from config to defconfig
      ARM: zynq: Remove CONFIG_API
      net: gem: Do not continue if phy is not found
      net: gem: Change mdio_wait prototype to pass regs
      net: gem: Change mii function not to use eth_device structure
      net: gem: Remove phydev variable
      net: gem: Extract phy init code
      net: gem: Check if priv->phydev is valid
      net: gem: Enable MDIO bus earlier
      net: gem: Remove zynq_gem_of_init()
      net: gem: Fix miiphy_read name
      net: gem: Move driver to DM
      net: gem: Read information about interface from DT
      net: gem: Move gem to Kconfig
      net: gem: Enable CTRL+C in wait_for_bit
      ARM64: zynqmp: Enable FIT config option via Kconfig
      ARM: zynq: Enable debug console for zc702
      ARM: zynq: Fix location of stack and malloc areas
      ARM: zynq: Extend malloc size
      ARM: zynq: Remove unused SERIAL macros for serial_zynq
      zynq: sdhci: Remove zynq_sdhci_of_init()
      zynq: sdhci: Move driver to DM
      serial: zynq: Fix incorrect reference to s5p driver
      serial: zynq: Remove duplicated header
      i2c: cmd: Relocate subcommands when MANUAL_RELOC
      dm: cmd: Relocate subcommands when MANUAL_RELOC
      dm: core: Enable SPL_SIMPLE_BUS by default

Siva Durga Prasad Paladugu (1):
      zynq: sdhci: Calculate minimum frequency based on max frequency

 arch/arm/Kconfig                             |   4 +++
 arch/arm/dts/zynq-zc702.dts                  |   3 ++
 arch/arm/include/asm/arch-zynqmp/hardware.h  |   6 ----
 arch/arm/include/asm/arch-zynqmp/sys_proto.h |   1 -
 arch/arm/mach-zynq/include/mach/hardware.h   |   4 ---
 arch/arm/mach-zynq/include/mach/sys_proto.h  |   3 --
 board/xilinx/zynq/board.c                    |  30 ----------------
 board/xilinx/zynqmp/zynqmp.c                 |  47 ------------------------
 common/cmd_i2c.c                             |  16 ++++++---
 configs/xilinx_zynqmp_ep_defconfig           |   3 ++
 configs/zynq_microzed_defconfig              |   2 ++
 configs/zynq_picozed_defconfig               |   2 ++
 configs/zynq_zc702_defconfig                 |   6 ++++
 configs/zynq_zc706_defconfig                 |   2 ++
 configs/zynq_zc770_xm010_defconfig           |   2 ++
 configs/zynq_zc770_xm011_defconfig           |   2 ++
 configs/zynq_zc770_xm012_defconfig           |   2 ++
 configs/zynq_zc770_xm013_defconfig           |   2 ++
 configs/zynq_zed_defconfig                   |   2 ++
 configs/zynq_zybo_defconfig                  |   2 ++
 drivers/core/Kconfig                         |   2 +-
 drivers/mmc/zynq_sdhci.c                     |  67
++++++++++++++++------------------
 drivers/net/Kconfig                          |   6 ++++
 drivers/net/zynq_gem.c                       | 314
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------
 drivers/serial/Kconfig                       |   2 +-
 drivers/serial/serial_zynq.c                 |   5 +--
 include/configs/xilinx_zynqmp.h              |   7 +---
 include/configs/xilinx_zynqmp_ep.h           |   3 --
 include/configs/zynq-common.h                |  29 ++++++---------
 include/configs/zynq_microzed.h              |   3 --
 include/configs/zynq_picozed.h               |   3 --
 include/configs/zynq_zc70x.h                 |   3 --
 include/configs/zynq_zc770.h                 |   4 ---
 include/configs/zynq_zed.h                   |   3 --
 include/configs/zynq_zybo.h                  |   3 --
 include/netdev.h                             |   3 --
 test/dm/cmd_dm.c                             |  14 ++++++++
 37 files changed, 285 insertions(+), 327 deletions(-)

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151207/bbf4728e/attachment.sig>