[U-Boot] [PATCH v2 5/5] drivers: at91: clean up peripheral clock code

[Wenyou Yang]

Due to introducing the new peripheral clock handle functions,
use these functions to reduce the duplicated code.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

Changes in v2: None

 drivers/net/at91_emac.c       |    9 ++++-----
 drivers/usb/host/ehci-atmel.c |    8 --------
 drivers/usb/host/ohci-at91.c  |   20 ++++----------------
 3 files changed, 8 insertions(+), 29 deletions(-)

diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index d51e098..bb6866d 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -12,7 +12,6 @@
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_emac.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_pio.h>
 #include <net.h>
 #include <netdev.h>
@@ -321,7 +320,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
 	emac_device *dev;
 	at91_emac_t *emac;
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	emac = (at91_emac_t *) netdev->iobase;
 	dev = (emac_device *) netdev->priv;
@@ -347,7 +345,8 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
 	writel(value, &pio->piob.pdr);
 	writel(value, &pio->piob.bsr);
 
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+	at91_periph_clk_enable(ATMEL_ID_EMAC);
+
 	writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl);
 
 	/* Init Ethernet buffers */
@@ -452,10 +451,10 @@ static int at91emac_recv(struct eth_device *netdev)
 static int at91emac_write_hwaddr(struct eth_device *netdev)
 {
 	at91_emac_t *emac;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 	emac = (at91_emac_t *) netdev->iobase;
 
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+	at91_periph_clk_enable(ATMEL_ID_EMAC);
+
 	debug_cond(DEBUG_AT91EMAC,
 		"init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n",
 		netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3],
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 9a8f004..a33fb49 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -40,11 +40,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 	}
 
 	/* Enable USB Host clock */
-#ifdef CPU_HAS_PCR
 	at91_periph_clk_enable(ATMEL_ID_UHPHS);
-#else
-	writel(1 << ATMEL_ID_UHPHS, &pmc->pcer);
-#endif
 
 	*hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI;
 	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
@@ -59,11 +55,7 @@ int ehci_hcd_stop(int index)
 	ulong start_time, tmp_time;
 
 	/* Disable USB Host Clock */
-#ifdef CPU_HAS_PCR
 	at91_periph_clk_disable(ATMEL_ID_UHPHS);
-#else
-	writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr);
-#endif
 
 	start_time = get_timer(0);
 	/* Disable UTMI PLL */
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 820e2e5..da85111 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -37,17 +37,11 @@ int usb_cpu_init(void)
 	writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb);
 #endif
 
-	/* Enable USB host clock. */
-#ifdef CPU_HAS_PCR
 	at91_periph_clk_enable(ATMEL_ID_UHP);
-#else
-	writel(1 << ATMEL_ID_UHP, &pmc->pcer);
-#endif
 
+	at91_system_clk_enable(ATMEL_PMC_UHP);
 #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
-	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
-#else
-	writel(ATMEL_PMC_UHP, &pmc->scer);
+	at91_system_clk_enable(AT91_PMC_HCK0);
 #endif
 
 	return 0;
@@ -57,17 +51,11 @@ int usb_cpu_stop(void)
 {
 	at91_pmc_t *pmc	= (at91_pmc_t *)ATMEL_BASE_PMC;
 
-	/* Disable USB host clock. */
-#ifdef CPU_HAS_PCR
 	at91_periph_clk_disable(ATMEL_ID_UHP);
-#else
-	writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
-#endif
 
+	at91_system_clk_disable(ATMEL_PMC_UHP);
 #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
-	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
-#else
-	writel(ATMEL_PMC_UHP, &pmc->scdr);
+	at91_system_clk_disable(AT91_PMC_HCK0);
 #endif
 
 #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
-- 
1.7.9.5