[U-Boot] [PATCH v8 01/14] sf: spi_flash_validate_params => spi_flash_scan
Bin Meng
bmeng.cn at gmail.com
Thu Dec 10 02:30:37 CET 2015
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki <jteki at openedev.com> wrote:
> Rename spi_flash_validate_params to spi_flash_scan
> as this code not only deals with params setup but
> also configure all spi_flash attributes.
>
> And also moved all flash related code into
> spi_flash_scan for future functionality addition.
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> Signed-off-by: Jagan Teki <jteki at openedev.com>
> ---
> drivers/mtd/spi/sf_probe.c | 145 +++++++++++++++++++++++----------------------
> 1 file changed, 75 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
> index a619182..0e20088 100644
> --- a/drivers/mtd/spi/sf_probe.c
> +++ b/drivers/mtd/spi/sf_probe.c
> @@ -130,13 +130,42 @@ bank_end:
> }
> #endif
>
> -static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
> +{
> + fdt_addr_t addr;
> + fdt_size_t size;
> + int node;
> +
> + /* If there is no node, do nothing */
> + node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
> + if (node < 0)
> + return 0;
> +
> + addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
> + if (addr == FDT_ADDR_T_NONE) {
> + debug("%s: Cannot decode address\n", __func__);
> + return 0;
> + }
> +
> + if (flash->size != size) {
> + debug("%s: Memory map must cover entire device\n", __func__);
> + return -1;
> + }
> + flash->memory_map = map_sysmem(addr, size);
> +
> + return 0;
> +}
> +#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
> +
> +static int spi_flash_scan(struct spi_slave *spi, u8 *idcode,
> struct spi_flash *flash)
nits: please align above line to the left (
> {
> const struct spi_flash_params *params;
> u8 cmd;
> u16 jedec = idcode[1] << 8 | idcode[2];
> u16 ext_jedec = idcode[3] << 8 | idcode[4];
> + int ret;
>
> /* Validate params from spi_flash_params table */
> params = spi_flash_params_table;
> @@ -158,6 +187,13 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
> return -EPROTONOSUPPORT;
> }
>
> + /* Flash powers up read-only, so clear BP# bits */
> +#if defined(CONFIG_SPI_FLASH_ATMEL) || \
> + defined(CONFIG_SPI_FLASH_MACRONIX) || \
> + defined(CONFIG_SPI_FLASH_SST)
> + spi_flash_cmd_write_status(flash, 0);
> +#endif
> +
> /* Assign spi data */
> flash->spi = spi;
> flash->name = params->name;
> @@ -253,6 +289,17 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
> /* Go for default supported write cmd */
> flash->write_cmd = CMD_PAGE_PROGRAM;
>
> + /* Set the quad enable bit - only for quad commands */
> + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
> + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
> + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
> + ret = spi_flash_set_qeb(flash, idcode[0]);
> + if (ret) {
> + debug("SF: Fail to set QEB for %02x\n", idcode[0]);
> + return -EINVAL;
> + }
> + }
> +
> /* Read dummy_byte: dummy byte is determined based on the
> * dummy cycles of a particular command.
> * Fast commands - dummy_byte = dummy_cycles/8
> @@ -279,48 +326,41 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
>
> /* Configure the BAR - discover bank cmds and read current bank */
> #ifdef CONFIG_SPI_FLASH_BAR
> - int ret = spi_flash_read_bank(flash, idcode[0]);
> + ret = spi_flash_read_bank(flash, idcode[0]);
> if (ret < 0)
> return ret;
> #endif
>
> - /* Flash powers up read-only, so clear BP# bits */
> -#if defined(CONFIG_SPI_FLASH_ATMEL) || \
> - defined(CONFIG_SPI_FLASH_MACRONIX) || \
> - defined(CONFIG_SPI_FLASH_SST)
> - spi_flash_cmd_write_status(flash, 0);
> -#endif
> -
> - return 0;
> -}
> -
> #if CONFIG_IS_ENABLED(OF_CONTROL)
> -int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
> -{
> - fdt_addr_t addr;
> - fdt_size_t size;
> - int node;
> -
> - /* If there is no node, do nothing */
> - node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
> - if (node < 0)
> - return 0;
> -
> - addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
> - if (addr == FDT_ADDR_T_NONE) {
> - debug("%s: Cannot decode address\n", __func__);
> - return 0;
> + ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
> + if (ret) {
> + debug("SF: FDT decode error\n");
> + return -EINVAL;
> }
> +#endif
>
> - if (flash->size != size) {
> - debug("%s: Memory map must cover entire device\n", __func__);
> - return -1;
> +#ifndef CONFIG_SPL_BUILD
> + printf("SF: Detected %s with page size ", flash->name);
> + print_size(flash->page_size, ", erase size ");
> + print_size(flash->erase_size, ", total ");
> + print_size(flash->size, "");
> + if (flash->memory_map)
> + printf(", mapped at %p", flash->memory_map);
> + puts("\n");
> +#endif
> +
> +#ifndef CONFIG_SPI_FLASH_BAR
> + if (((flash->dual_flash == SF_SINGLE_FLASH) &&
> + (flash->size > SPI_FLASH_16MB_BOUN)) ||
> + ((flash->dual_flash > SF_SINGLE_FLASH) &&
> + (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
> + puts("SF: Warning - Only lower 16MiB accessible,");
> + puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
> }
> - flash->memory_map = map_sysmem(addr, size);
> +#endif
>
> - return 0;
> + return ret;
> }
> -#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
>
> /**
> * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
> @@ -359,47 +399,12 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
> print_buffer(0, idcode, 1, sizeof(idcode), 0);
> #endif
>
> - if (spi_flash_validate_params(spi, idcode, flash)) {
> + ret = spi_flash_scan(spi, idcode, flash);
> + if (ret) {
> ret = -EINVAL;
> goto err_read_id;
> }
>
> - /* Set the quad enable bit - only for quad commands */
> - if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
> - (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
> - (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
> - if (spi_flash_set_qeb(flash, idcode[0])) {
> - debug("SF: Fail to set QEB for %02x\n", idcode[0]);
> - ret = -EINVAL;
> - goto err_read_id;
> - }
> - }
> -
> -#if CONFIG_IS_ENABLED(OF_CONTROL)
> - if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
> - debug("SF: FDT decode error\n");
> - ret = -EINVAL;
> - goto err_read_id;
> - }
> -#endif
> -#ifndef CONFIG_SPL_BUILD
> - printf("SF: Detected %s with page size ", flash->name);
> - print_size(flash->page_size, ", erase size ");
> - print_size(flash->erase_size, ", total ");
> - print_size(flash->size, "");
> - if (flash->memory_map)
> - printf(", mapped at %p", flash->memory_map);
> - puts("\n");
> -#endif
> -#ifndef CONFIG_SPI_FLASH_BAR
> - if (((flash->dual_flash == SF_SINGLE_FLASH) &&
> - (flash->size > SPI_FLASH_16MB_BOUN)) ||
> - ((flash->dual_flash > SF_SINGLE_FLASH) &&
> - (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
> - puts("SF: Warning - Only lower 16MiB accessible,");
> - puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
> - }
> -#endif
> #ifdef CONFIG_SPI_FLASH_MTD
> ret = spi_flash_mtd_register(flash);
> #endif
> --
Other than that,
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>
More information about the U-Boot
mailing list