[U-Boot] [PATCH v3 3/5] ARM: cpu: at91: clean up peripheral clock code
Heiko Schocher
hs at denx.de
Thu Dec 10 10:38:13 CET 2015
Hello Wenyou,
Am 10.12.2015 um 03:20 schrieb Wenyou Yang:
> Due to introducing the new peripheral clock handle functions,
> use these functions to clean up the duplicated code.
>
> Meanwhile, remove unneeded header file include, at91_pmc.h.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 13 ++-----
> arch/arm/mach-at91/arm920t/timer.c | 4 +-
> arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 36 +++++-------------
> arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 28 ++++----------
> arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 37 +++++-------------
> .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 33 ++++------------
> arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 40 +++++---------------
> arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 28 ++++----------
> arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 38 +++++--------------
> arch/arm/mach-at91/arm926ejs/cpu.c | 1 -
> arch/arm/mach-at91/arm926ejs/timer.c | 5 +--
> arch/arm/mach-at91/armv7/cpu.c | 1 -
> arch/arm/mach-at91/armv7/timer.c | 1 -
> arch/arm/mach-at91/phy.c | 1 -
> arch/arm/mach-at91/sdram.c | 1 -
> 15 files changed, 65 insertions(+), 202 deletions(-)
Tested on the smartweb board, see log:
http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/logs/tbotlog
Tested-by: Heiko Schocher <hs at denx.de>
bye,
Heiko
>
> diff --git a/arch/arm/mach-at91/arm920t/at91rm9200_devices.c b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
> index fc54327..a340122 100644
> --- a/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
> +++ b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
> @@ -14,7 +14,6 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/gpio.h>
>
> /*
> @@ -34,29 +33,23 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTA, 18, PUP); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 20, PUP); /* RXD1 */
> at91_set_a_periph(AT91_PIO_PORTB, 21, 1); /* TXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* RXD2 */
> at91_set_a_periph(AT91_PIO_PORTA, 23, 1); /* TXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> diff --git a/arch/arm/mach-at91/arm920t/timer.c b/arch/arm/mach-at91/arm920t/timer.c
> index 6aa2994..3190961 100644
> --- a/arch/arm/mach-at91/arm920t/timer.c
> +++ b/arch/arm/mach-at91/arm920t/timer.c
> @@ -19,7 +19,6 @@
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/at91_tc.h>
> -#include <asm/arch/at91_pmc.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -31,8 +30,7 @@ int timer_init(void)
> at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
> at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
>
> - /* enables TC1.0 clock */
> - writel(1 << ATMEL_ID_TC0, &pmc->pcer); /* enable clock */
> + at91_periph_clk_enable(ATMEL_ID_TC0);
>
> writel(0, &tc->bcr);
> writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE |
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
> index 5e0c0f5..912a966 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
> @@ -11,8 +11,8 @@
> #include <asm/io.h>
> #include <asm/arch/at91sam9260_matrix.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91sam9_sdramc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
>
> /*
> @@ -32,51 +32,40 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
> @@ -106,14 +95,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
> at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
> at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
> @@ -145,9 +131,7 @@ void at91_spi1_hw_init(unsigned long cs_mask)
> #ifdef CONFIG_MACB
> void at91_macb_hw_init(void)
> {
> - /* Enable EMAC clock */
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_EMAC0);
>
> at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */
> at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */
> @@ -190,9 +174,7 @@ void at91_macb_hw_init(void)
> #if defined(CONFIG_GENERIC_ATMEL_MCI)
> void at91_mci_hw_init(void)
> {
> - /* Enable mci clock */
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> - writel(1 << ATMEL_ID_MCI, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_MCI);
>
> at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
> #if defined(CONFIG_ATMEL_MCI_PORTB)
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
> index a445c75..4bd4e75 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
> @@ -9,7 +9,7 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
>
> /*
> @@ -29,51 +29,40 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
> @@ -103,14 +92,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */
> at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */
> at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTB, 28, 1);
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
> index 6b51d5f..f3f4800 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
> @@ -13,7 +13,7 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
>
> /*
> @@ -33,51 +33,40 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
> at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
> at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0)) {
> at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
> @@ -107,14 +96,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */
> at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */
> at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
> @@ -146,9 +132,7 @@ void at91_spi1_hw_init(unsigned long cs_mask)
> #if defined(CONFIG_GENERIC_ATMEL_MCI)
> void at91_mci_hw_init(void)
> {
> - /* Enable mci clock */
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> - writel(1 << ATMEL_ID_MCI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_MCI1);
>
> at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */
>
> @@ -207,12 +191,9 @@ void at91_uhp_hw_init(void)
> #ifdef CONFIG_AT91_CAN
> void at91_can_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */
> at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_CAN, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_CAN);
> }
> #endif
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
> index 0e6c0da..0d83426 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
> @@ -8,7 +8,7 @@
>
> #include <common.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
> #include <asm/io.h>
>
> @@ -29,51 +29,40 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
> @@ -103,14 +92,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */
> at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */
> at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
> @@ -169,8 +155,6 @@ void at91_macb_hw_init(void)
> #ifdef CONFIG_GENERIC_ATMEL_MCI
> void at91_mci_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */
> at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */
> at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */
> @@ -178,7 +162,6 @@ void at91_mci_hw_init(void)
> at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */
> at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_MCI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_MCI0);
> }
> #endif
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
> index 39f17a1..a03abfc 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
> @@ -8,8 +8,8 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_pio.h>
> +#include <asm/arch/clk.h>
>
> unsigned int has_lcdc()
> {
> @@ -18,60 +18,47 @@ unsigned int has_lcdc()
>
> void at91_serial0_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_serial3_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
> at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
> - writel(1 << ATMEL_ID_USART3, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART3);
> }
>
> void at91_seriald_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
> at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #ifdef CONFIG_ATMEL_SPI
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0))
> at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
> @@ -85,14 +72,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
> at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
> at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0))
> at91_set_pio_output(AT91_PIO_PORTA, 8, 1);
> @@ -107,8 +91,6 @@ void at91_spi1_hw_init(unsigned long cs_mask)
>
> void at91_mci_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
> at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
> at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
> @@ -116,14 +98,12 @@ void at91_mci_hw_init(void)
> at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
> at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
>
> - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_HSMCI0);
> }
>
> #ifdef CONFIG_LCD
> void at91_lcd_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
> at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
> at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
> @@ -156,6 +136,6 @@ void at91_lcd_hw_init(void)
> at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
> at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
>
> - writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_LCDC);
> }
> #endif
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
> index 857c864..dbf9386 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
> @@ -9,7 +9,7 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
>
> /*
> @@ -29,51 +29,40 @@
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */
> at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */
> at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */
> at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI);
>
> if (cs_mask & (1 << 0)) {
> at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
> @@ -105,8 +94,6 @@ void at91_spi0_hw_init(unsigned long cs_mask)
> #ifdef CONFIG_GENERIC_ATMEL_MCI
> void at91_mci_hw_init(void)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI CLK */
> at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI CDA */
> at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI DA0 */
> @@ -114,7 +101,6 @@ void at91_mci_hw_init(void)
> at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI DA2 */
> at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI DA3 */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_MCI, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_MCI);
> }
> #endif
> diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
> index 6d94572..3e4555a 100644
> --- a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
> +++ b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
> @@ -6,7 +6,7 @@
>
> #include <common.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
> #include <asm/io.h>
>
> @@ -64,42 +64,34 @@ char *get_cpu_name()
>
> void at91_seriald_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
> at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
>
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
> }
>
> void at91_serial0_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */
> at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */
>
> - writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART0);
> }
>
> void at91_serial1_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */
> at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */
>
> - writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART1);
> }
>
> void at91_serial2_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */
> at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */
>
> - writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_USART2);
> }
>
> void at91_mci_hw_init(void)
> @@ -112,22 +104,17 @@ void at91_mci_hw_init(void)
> at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */
> at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */
>
> - /* Enable clock for MCI0 */
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_HSMCI0);
> }
>
> #ifdef CONFIG_ATMEL_SPI
> void at91_spi0_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
> at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
> at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI0);
>
> if (cs_mask & (1 << 0))
> at91_set_a_periph(AT91_PIO_PORTA, 14, 0);
> @@ -149,14 +136,11 @@ void at91_spi0_hw_init(unsigned long cs_mask)
>
> void at91_spi1_hw_init(unsigned long cs_mask)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
> at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
> at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
>
> - /* Enable clock */
> - writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SPI1);
>
> if (cs_mask & (1 << 0))
> at91_set_b_periph(AT91_PIO_PORTA, 8, 0);
> @@ -193,11 +177,9 @@ void at91_uhp_hw_init(void)
> #ifdef CONFIG_MACB
> void at91_macb_hw_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> -
> if (has_emac0()) {
> /* Enable EMAC0 clock */
> - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_EMAC0);
> /* EMAC0 pins setup */
> at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */
> at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */
> @@ -213,7 +195,7 @@ void at91_macb_hw_init(void)
>
> if (has_emac1()) {
> /* Enable EMAC1 clock */
> - writel(1 << ATMEL_ID_EMAC1, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_EMAC1);
> /* EMAC1 pins setup */
> at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */
> at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */
> diff --git a/arch/arm/mach-at91/arm926ejs/cpu.c b/arch/arm/mach-at91/arm926ejs/cpu.c
> index 990c689..9b9f8af 100644
> --- a/arch/arm/mach-at91/arm926ejs/cpu.c
> +++ b/arch/arm/mach-at91/arm926ejs/cpu.c
> @@ -10,7 +10,6 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_pit.h>
> #include <asm/arch/at91_gpbr.h>
> #include <asm/arch/clk.h>
> diff --git a/arch/arm/mach-at91/arm926ejs/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c
> index 31ce646..c49d306 100644
> --- a/arch/arm/mach-at91/arm926ejs/timer.c
> +++ b/arch/arm/mach-at91/arm926ejs/timer.c
> @@ -10,7 +10,6 @@
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/at91_pit.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/clk.h>
> #include <div64.h>
>
> @@ -38,11 +37,9 @@ DECLARE_GLOBAL_DATA_PTR;
> */
> int timer_init(void)
> {
> - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
>
> - /* Enable PITC Clock */
> - writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> + at91_periph_clk_enable(ATMEL_ID_SYS);
>
> /* Enable PITC */
> writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
> diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c
> index 7843aed..1865303 100644
> --- a/arch/arm/mach-at91/armv7/cpu.c
> +++ b/arch/arm/mach-at91/armv7/cpu.c
> @@ -12,7 +12,6 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_pit.h>
> #include <asm/arch/at91_gpbr.h>
> #include <asm/arch/clk.h>
> diff --git a/arch/arm/mach-at91/armv7/timer.c b/arch/arm/mach-at91/armv7/timer.c
> index a4a3817..6f91e22 100644
> --- a/arch/arm/mach-at91/armv7/timer.c
> +++ b/arch/arm/mach-at91/armv7/timer.c
> @@ -13,7 +13,6 @@
> #include <asm/io.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/at91_pit.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/clk.h>
> #include <div64.h>
>
> diff --git a/arch/arm/mach-at91/phy.c b/arch/arm/mach-at91/phy.c
> index 2cba716..ddd70f5 100644
> --- a/arch/arm/mach-at91/phy.c
> +++ b/arch/arm/mach-at91/phy.c
> @@ -15,7 +15,6 @@
> #include <common.h>
> #include <asm/io.h>
> #include <linux/sizes.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_rstc.h>
> #include <watchdog.h>
>
> diff --git a/arch/arm/mach-at91/sdram.c b/arch/arm/mach-at91/sdram.c
> index 5758b06..1dfc74f 100644
> --- a/arch/arm/mach-at91/sdram.c
> +++ b/arch/arm/mach-at91/sdram.c
> @@ -13,7 +13,6 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/at91_common.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91sam9_sdramc.h>
> #include <asm/arch/gpio.h>
>
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list