[U-Boot] [RFC PATCH 02/11] gpio: Add support for Qualcomm gpio controller

Mateusz Kulikowski mateusz.kulikowski at gmail.com
Thu Dec 10 22:41:38 CET 2015


Add support for gpio controllers on Qualcomm Snapdragon devices.
This devices are usually called Top Level Mode Multiplexing in
Qualcomm documentation.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
---

 drivers/gpio/Kconfig    |   7 +++
 drivers/gpio/Makefile   |   2 +-
 drivers/gpio/msm_gpio.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 123 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpio/msm_gpio.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e60e9fd..1d9443b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -46,6 +46,13 @@ config LPC32XX_GPIO
 	help
 	  Support for the LPC32XX GPIO driver.
 
+config MSM_GPIO
+	bool "Qualcomm GPIO driver"
+	depends on DM_GPIO
+	default n
+	help
+	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
+
 config ROCKCHIP_GPIO
 	bool "Rockchip GPIO driver"
 	depends on DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fb4fd25..9520b1e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO)	+= stm32_gpio.o
 obj-$(CONFIG_ZYNQ_GPIO)		+= zynq_gpio.o
 obj-$(CONFIG_VYBRID_GPIO)	+= vybrid_gpio.o
 obj-$(CONFIG_HIKEY_GPIO)	+= hi6220_gpio.o
-
+obj-$(CONFIG_MSM_GPIO)		+= msm_gpio.o
diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c
new file mode 100644
index 0000000..9bb9e89
--- /dev/null
+++ b/drivers/gpio/msm_gpio.c
@@ -0,0 +1,115 @@
+/*
+ * Qualcomm GPIO driver
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct msm_gpio_bank {
+	phys_addr_t base;
+};
+
+static int msm_gpio_direction_input(struct udevice *dev, unsigned int gpio)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+	phys_addr_t reg = priv->base + GPIO_CONFIG_OFF(gpio);
+
+	/* Disable OE bit */
+	writel((readl(reg) & ~GPIO_OE_MASK) | GPIO_OE_DISABLE , reg);
+	return 0;
+}
+
+static int msm_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+
+	value = !!value;
+	/* set value */
+	writel(value << GPIO_OUT, priv->base + GPIO_IN_OUT_OFF(gpio));
+	return 0;
+}
+
+static int msm_gpio_direction_output(struct udevice *dev, unsigned gpio,
+				     int value)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+	phys_addr_t reg = priv->base + GPIO_CONFIG_OFF(gpio);
+
+	value = !!value;
+	/* set value */
+	writel(value << GPIO_OUT, priv->base + GPIO_IN_OUT_OFF(gpio));
+	/* switch direction */
+	writel((readl(reg) & ~GPIO_OE_MASK) | GPIO_OE_ENABLE , reg);
+	return 0;
+}
+
+static int msm_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+
+	return !!(readl(priv->base + GPIO_IN_OUT_OFF(gpio)) >> GPIO_IN);
+}
+
+static int msm_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+
+	if (readl(priv->base + GPIO_CONFIG_OFF(offset)) & GPIO_OE_ENABLE)
+		return GPIOF_OUTPUT;
+	return GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops gpio_msm_ops = {
+	.direction_input	= msm_gpio_direction_input,
+	.direction_output	= msm_gpio_direction_output,
+	.get_value		= msm_gpio_get_value,
+	.set_value		= msm_gpio_set_value,
+	.get_function		= msm_gpio_get_function,
+};
+
+static int msm_gpio_probe(struct udevice *dev)
+{
+	struct msm_gpio_bank *priv = dev_get_priv(dev);
+
+	priv->base = dev_get_addr(dev);
+	return priv->base == FDT_ADDR_T_NONE;
+}
+
+static int msm_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_priv->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+					     "gpio-count", 0);
+	uc_priv->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset,
+					 "gpio-bank-name", NULL);
+	if (uc_priv->bank_name == NULL)
+		uc_priv->bank_name = "soc";
+	return 0;
+}
+
+static const struct udevice_id msm_gpio_ids[] = {
+	{ .compatible = "qcom,msm8916-pinctrl" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpio_msm) = {
+	.name	= "gpio_msm",
+	.id	= UCLASS_GPIO,
+	.of_match = msm_gpio_ids,
+	.ofdata_to_platdata = msm_gpio_ofdata_to_platdata,
+	.probe	= msm_gpio_probe,
+	.ops	= &gpio_msm_ops,
+	.priv_auto_alloc_size = sizeof(struct msm_gpio_bank),
+};
+
+
-- 
2.5.0



More information about the U-Boot mailing list