[U-Boot] [PATCH 4/5] microblaze: Remove unused I2C macros

[Michal Simek]

There is no i2c driver in the current u-boot.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/microblaze-generic/xparameters.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index 11b3c9a4846e..79c87fb61803 100644
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -28,11 +28,6 @@
 #define XILINX_TIMER_BASEADDR	0x41c00000
 #define XILINX_TIMER_IRQ	0
 
-/* IIC pheriphery is IIC_EEPROM */
-#define XILINX_IIC_0_BASEADDR	0x40800000
-#define XILINX_IIC_0_FREQ	100000
-#define XILINX_IIC_0_BIT	0
-
 /* GPIO is LEDs_4Bit*/
 #define XILINX_GPIO_BASEADDR	0x40000000
 
-- 
1.9.1