[U-Boot] [PATCH 03/12] net: emaclite: Convert MDIO to use register offset
Michal Simek
michal.simek at xilinx.com
Fri Dec 11 13:03:34 CET 2015
Use u-boot coding style how to setup and access MDIO bus.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/net/xilinx_emaclite.c | 92 ++++++++++++++++++++++++++-----------------
1 file changed, 56 insertions(+), 36 deletions(-)
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index f5e4c029ed75..9d413a0bbf8d 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -50,12 +50,6 @@
/* Recv interrupt enable bit */
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
-/* MDIO */
-#define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */
-#define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */
-#define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */
-#define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */
-
/* MDIO Address Register Bit Masks */
#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */
#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */
@@ -72,12 +66,36 @@
#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */
#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */
+struct emaclite_regs {
+ u32 tx_ping; /* 0x0 - TX Ping buffer */
+ u32 reserved1[504];
+ u32 mdioaddr; /* 0x7e4 - MDIO Address Register */
+ u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */
+ u32 mdiord;/* 0x7ec - MDIO Read Data Register */
+ u32 mdioctrl; /* 0x7f0 - MDIO Control Register */
+ u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */
+ u32 global_interrupt; /* 0x7f8 - Global interrupt enable */
+ u32 tx_ping_tsr; /* 0x7fc - Tx status */
+ u32 tx_pong; /* 0x800 - TX Pong buffer */
+ u32 reserved2[508];
+ u32 tx_pong_tplr; /* 0xff4 - Tx packet length */
+ u32 reserved3; /* 0xff8 */
+ u32 tx_pong_tsr; /* 0xffc - Tx status */
+ u32 rx_ping; /* 0x1000 - Receive Buffer */
+ u32 reserved4[510];
+ u32 rx_ping_rsr; /* 0x17fc - Rx status */
+ u32 rx_pong; /* 0x1800 - Receive Buffer */
+ u32 reserved5[510];
+ u32 rx_pong_rsr; /* 0x1ffc - Rx status */
+};
+
struct xemaclite {
u32 nexttxbuffertouse; /* Next TX buffer to write to */
u32 nextrxbuffertouse; /* Next RX buffer to read from */
u32 txpp; /* TX ping pong buffer */
u32 rxpp; /* RX ping pong buffer */
int phyaddr;
+ struct emaclite_regs *regs;
struct phy_device *phydev;
struct mii_dev *bus;
};
@@ -169,38 +187,39 @@ static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
return -ETIMEDOUT;
}
-static int mdio_wait(struct eth_device *dev)
+static int mdio_wait(struct emaclite_regs *regs)
{
- return wait_for_bit(__func__,
- (u32 *)(dev->iobase + XEL_MDIOCTRL_OFFSET),
+ return wait_for_bit(__func__, ®s->mdioctrl,
XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000);
}
-static u32 phyread(struct eth_device *dev, u32 phyaddress, u32 registernum,
+static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
u16 *data)
{
- if (mdio_wait(dev))
+ struct emaclite_regs *regs = emaclite->regs;
+
+ if (mdio_wait(regs))
return 1;
- u32 ctrl_reg = in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET);
- out_be32(dev->iobase + XEL_MDIOADDR_OFFSET,
- XEL_MDIOADDR_OP_MASK |
+ u32 ctrl_reg = in_be32(®s->mdioctrl);
+ out_be32(®s->mdioaddr, XEL_MDIOADDR_OP_MASK |
((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
- out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
/* Read data */
- *data = in_be32(dev->iobase + XEL_MDIORD_OFFSET);
+ *data = in_be32(®s->mdiord);
return 0;
}
-static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
+static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
u16 data)
{
- if (mdio_wait(dev))
+ struct emaclite_regs *regs = emaclite->regs;
+
+ if (mdio_wait(regs))
return 1;
/*
@@ -209,15 +228,13 @@ static u32 phywrite(struct eth_device *dev, u32 phyaddress, u32 registernum,
* Data register. Finally, set the Status bit in the MDIO Control
* register to start a MDIO write transaction.
*/
- u32 ctrl_reg = in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET);
- out_be32(dev->iobase + XEL_MDIOADDR_OFFSET,
- ~XEL_MDIOADDR_OP_MASK &
+ u32 ctrl_reg = in_be32(®s->mdioctrl);
+ out_be32(®s->mdioaddr, ~XEL_MDIOADDR_OP_MASK &
((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
- out_be32(dev->iobase + XEL_MDIOWR_OFFSET, data);
- out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ out_be32(®s->mdiowr, data);
+ out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
- if (mdio_wait(dev))
+ if (mdio_wait(regs))
return 1;
return 0;
@@ -254,7 +271,7 @@ static int setup_phy(struct eth_device *dev)
SUPPORTED_100baseT_Full;
if (emaclite->phyaddr != -1) {
- phyread(dev, emaclite->phyaddr, PHY_DETECT_REG, &phyreg);
+ phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
@@ -270,7 +287,7 @@ static int setup_phy(struct eth_device *dev)
if (emaclite->phyaddr == -1) {
/* detect the PHY address */
for (i = 31; i >= 0; i--) {
- phyread(dev, i, PHY_DETECT_REG, &phyreg);
+ phyread(emaclite, i, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
@@ -310,6 +327,8 @@ static int setup_phy(struct eth_device *dev)
static int emaclite_init(struct eth_device *dev, bd_t *bis)
{
struct xemaclite *emaclite = dev->priv;
+ struct emaclite_regs *regs = emaclite->regs;
+
debug("EmacLite Initialization Started\n");
/*
@@ -352,9 +371,8 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis)
XEL_RSR_RECV_IE_MASK);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
- out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET, XEL_MDIOCTRL_MDIOEN_MASK);
- if (in_be32(dev->iobase + XEL_MDIOCTRL_OFFSET) &
- XEL_MDIOCTRL_MDIOEN_MASK)
+ out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
+ if (in_be32(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
if (!setup_phy(dev))
return -1;
#endif
@@ -536,7 +554,7 @@ static int emaclite_miiphy_read(const char *devname, uchar addr,
u32 ret;
struct eth_device *dev = eth_get_dev();
- ret = phyread(dev, addr, reg, val);
+ ret = phyread(dev->priv, addr, reg, val);
debug("emaclite: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val);
return ret;
}
@@ -547,7 +565,7 @@ static int emaclite_miiphy_write(const char *devname, uchar addr,
struct eth_device *dev = eth_get_dev();
debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, val);
- return phywrite(dev, addr, reg, val);
+ return phywrite(dev->priv, addr, reg, val);
}
#endif
@@ -556,6 +574,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
{
struct eth_device *dev;
struct xemaclite *emaclite;
+ struct emaclite_regs *regs;
dev = calloc(1, sizeof(*dev));
if (dev == NULL)
@@ -574,6 +593,8 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
sprintf(dev->name, "Xelite.%lx", base_addr);
+ emaclite->regs = (struct emaclite_regs *)base_addr;
+ regs = emaclite->regs;
dev->iobase = base_addr;
dev->init = emaclite_init;
dev->halt = emaclite_halt;
@@ -592,8 +613,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
miiphy_register(dev->name, emaclite_miiphy_read, emaclite_miiphy_write);
emaclite->bus = miiphy_get_dev_by_name(dev->name);
- out_be32(dev->iobase + XEL_MDIOCTRL_OFFSET,
- XEL_MDIOCTRL_MDIOEN_MASK);
+ out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
#endif
return 1;
--
1.9.1
More information about the U-Boot
mailing list