[U-Boot] Odroid U3 not able to boot using latest u-boot.

[Anand Moon]

Hi Przemyslaw,

On 11 December 2015 at 18:29, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> Hello Anand,
>
> On 12/11/2015 01:48 PM, Anand Moon wrote:
>>
>> Hi Przemyslaw,
>>
>> I have give it a try to put latest u-boot on my microsdcard
>> u-boot and it failed to boot. Could you help me out on this.
>>
>> U-Boot 2016.01-rc2-25762-g00502fe (Dec 11 2015 - 17:49:34 +0530)
>>
>> CPU:   Exynos4412 @ 1 GHz
>> Model: Odroid based on Exynos4412
>> Board: Odroid based on Exynos4412
>> Type:  u3
>> DRAM:  2 GiB
>> __of_translate_address: Bad cell count for gpf0
>> __of_translate_address: Bad cell count for gpj0
>> __of_translate_address: Bad cell count for gpk0
>> __of_translate_address: Bad cell count for gpm0
>> __of_translate_address: Bad cell count for gpx0
>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>> MMC:   EXYNOS DWMMC: 0
>> Card did not respond to voltage select!
>> *** Warning - MMC init failed, using default environment
>>
>> Net:   No ethernet found.
>> Hit any key to stop autoboot:  0
>> ** Bad device mmc 0 **
>> ** Bad device mmc 0 **
>> ** Bad device mmc 0 **
>> ** Bad device mmc 0 **
>> Odroid #
>> Odroid #
>> Odroid #
>> Odroid #
>>
>> -Anand Moon
>>
>>
>
> Yes, I know about this issue. There is a patch which fixes this:
>
> https://patchwork.ozlabs.org/patch/537372/
>
> Please apply this patch locally, I will send another solution for this
> issue, since at present it may be unsafe for some cases on other platforms.
>
> Best regards,
> --
> Przemyslaw Marczak
> Samsung R&D Institute Poland
> Samsung Electronics
> p.marczak at samsung.com

Thanks for this quick response, It worked for me. :)
I am able to boot my u3 boards.

-Anand Moon