[U-Boot] [PATCH 2/2] sunxi: Enable a second mmc socket as boot target in the environment

[Karsten Merker]

Some sunxi-based boards (such as the Olimex A20-SOM-EVB) have a
second MMC socket. This socket is not bootable hardware-wise,
i.e. u-boot itself cannot be loaded from it, but once u-boot has
started, the second socket can be used in the boot process
provided by config_distro_bootcmd.h.

If a second MMC socket is present, place it in the boot order
after the first MMC socket.

Signed-off-by: Karsten Merker <merker at debian.org>
---
 include/configs/sunxi-common.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 98a2c74..53ad6d2 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -418,6 +418,11 @@ extern int soft_i2c_gpio_scl;
 
 #ifdef CONFIG_MMC
 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
+#else
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
+#endif
 #else
 #define BOOT_TARGET_DEVICES_MMC(func)
 #endif
@@ -447,6 +452,7 @@ extern int soft_i2c_gpio_scl;
 #define BOOT_TARGET_DEVICES(func) \
 	func(FEL, fel, na) \
 	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
 	BOOT_TARGET_DEVICES_SCSI(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	func(PXE, pxe, na) \
-- 
2.1.4