[U-Boot] [PATCH 1/2] arm: lpc32xx: switch serial console to driver model

[Vladimir Zapolskiy]

On NXP LPC32xx platform for non-SPL builds the change adds
standard (NS16550) and high-speed UARTs to driver model.
Due to specific of DM NS16550 device description UART clock can not be
got in runtime and by default it is set to 13MHz, if board PERIPH_CLK
is different, this should be specified in board configuration file.

For SPL builds HSUARTs are disabled and non-DM NS16550 driver is
compiled, if needed.

The change also updates default configs of devkit3250 and work_92105
boards to reflect updates in platform files.

Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
---
 arch/arm/cpu/arm926ejs/lpc32xx/devices.c   | 37 ++++++++++++++++++++++++++++--
 arch/arm/include/asm/arch-lpc32xx/config.h | 32 +++++++++++++++-----------
 configs/devkit3250_defconfig               |  1 +
 configs/work_92105_defconfig               |  1 +
 4 files changed, 56 insertions(+), 15 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index b1c3f8f..447d0cd 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -5,12 +5,14 @@
  */
 
 #include <common.h>
-#include <asm/arch/cpu.h>
+#include <dm.h>
+#include <dm/platform_data/lpc32xx_hsuart.h>
+#include <ns16550.h>
+
 #include <asm/arch/clk.h>
 #include <asm/arch/uart.h>
 #include <asm/arch/mux.h>
 #include <asm/io.h>
-#include <dm.h>
 
 static struct clk_pm_regs    *clk  = (struct clk_pm_regs *)CLK_PM_BASE;
 static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
@@ -41,6 +43,37 @@ void lpc32xx_uart_init(unsigned int uart_id)
 	       &clk->u3clk + (uart_id - 3));
 }
 
+#if !CONFIG_IS_ENABLED(OF_CONTROL) && !defined(CONFIG_SPL_BUILD)
+static const struct ns16550_platdata lpc32xx_uart[] = {
+	{ UART3_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART4_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART5_BASE, 2, CONFIG_SYS_NS16550_CLK },
+	{ UART6_BASE, 2, CONFIG_SYS_NS16550_CLK },
+};
+
+#if defined(CONFIG_LPC32XX_HSUART)
+static const struct lpc32xx_hsuart_platdata lpc32xx_hsuart[] = {
+	{ HS_UART1_BASE, },
+	{ HS_UART2_BASE, },
+	{ HS_UART7_BASE, },
+};
+#endif
+
+U_BOOT_DEVICES(lpc32xx_uarts) = {
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[0], },
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[1], },
+#endif
+	{ "ns16550_serial", &lpc32xx_uart[0], },
+	{ "ns16550_serial", &lpc32xx_uart[1], },
+	{ "ns16550_serial", &lpc32xx_uart[2], },
+	{ "ns16550_serial", &lpc32xx_uart[3], },
+#if defined(CONFIG_LPC32XX_HSUART)
+	{ "lpc32xx_hsuart", &lpc32xx_hsuart[2], },
+#endif
+};
+#endif
+
 void lpc32xx_dma_init(void)
 {
 	/* Enable DMA interface */
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index 521bff1..27e60e1 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -16,16 +16,21 @@
 #define CONFIG_NR_DRAM_BANKS_MAX	2
 
 /* UART configuration */
-#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
-#elif	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
+#if	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
 	(CONFIG_SYS_LPC32XX_UART == 7)
+#if defined(CONFIG_SPL_BUILD)
+/* SPL images do not support LPC32xx HSUART, UART5 is selected for SPL */
+#undef CONFIG_SYS_LPC32XX_UART
+#define CONFIG_SYS_LPC32XX_UART		5
+#endif
+
+#if !defined(CONFIG_LPC32XX_HSUART)
 #define CONFIG_LPC32XX_HSUART
-#else
-#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
+#endif
 #endif
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 
@@ -33,15 +38,16 @@
 #define CONFIG_SYS_NS16550_COM2		UART4_BASE
 #define CONFIG_SYS_NS16550_COM3		UART5_BASE
 #define CONFIG_SYS_NS16550_COM4		UART6_BASE
+#endif
 
-#if defined(CONFIG_LPC32XX_HSUART)
-#if	CONFIG_SYS_LPC32XX_UART == 1
-#define HS_UART_BASE			HS_UART1_BASE
-#elif	CONFIG_SYS_LPC32XX_UART == 2
-#define HS_UART_BASE			HS_UART2_BASE
-#else	/* CONFIG_SYS_LPC32XX_UART == 7 */
-#define HS_UART_BASE			HS_UART7_BASE
+#if !defined(CONFIG_SYS_NS16550_CLK)
+#define CONFIG_SYS_NS16550_CLK		13000000
 #endif
+
+#if !defined(CONFIG_LPC32XX_HSUART) || defined(CONFIG_SPL_BUILD)
+#define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
+#else
+#define CONFIG_CONS_INDEX		CONFIG_SYS_LPC32XX_UART
 #endif
 
 #define CONFIG_SYS_BAUDRATE_TABLE	\
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 64a0fb0..0abb8e0 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_DEVKIT3250=y
+CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index 1cad3a2..a5a108e 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_WORK_92105=y
+CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
-- 
2.1.4