[U-Boot] [PATCH 1/6] arm: socfpga: cyclone5-socdk: Enabling mtd partitioning layout

[Chin Liang See]

On Sun, 2015-12-13 at 16:42 +0100, Marek Vasut wrote:
> On Sunday, December 13, 2015 at 02:03:02 PM, Chin Liang See wrote:
> > On Sun, 2015-12-13 at 04:14 +0100, Marek Vasut wrote:
> > > On Sunday, December 13, 2015 at 01:49:06 AM, Chin Liang See
> > > wrote:
> > > > On Sun, 2015-12-13 at 01:01 +0100, Marek Vasut wrote:
> > > > > On Sunday, December 13, 2015 at 12:59:48 AM, Chin Liang See
> > > > > 
> > > > > wrote:
> > > > > > On Sat, 2015-12-12 at 16:36 +0100, Marek Vasut wrote:
> > > > > > > On Saturday, December 12, 2015 at 07:30:46 AM, Chin Liang
> > > > > > > See
> > > > > > 
> > > > > > > wrote:
> > > > > > [...]
> > > > > > 
> > > > > > > > > Can you share the final layout before you roll out
> > > > > > > > > patches ?
> > > > > > > > 
> > > > > > > > Sure, plan to do so but need to away from desk just
> > > > > > > > now.
> > > > > > > > 
> > > > > > > > Here is the old layout
> > > > > > > > 256k(spl)
> > > > > > > > 64k(env)
> > > > > > > > 64k(dtb)
> > > > > > > > 256k(boot)
> > > > > > > > 16m(kernel)
> > > > > > > > 16m(rootfs)
> > > > > > > > 
> > > > > > > > The new one would like this
> > > > > > > > 256k(spl)
> > > > > > > 
> > > > > > > I'd say you should just call this u-boot, see above for
> > > > > > > the
> > > > > > > rationale.
> > > > > > > 
> > > > > > > > 256k(env)
> > > > > > > > 15872k(boot)
> > > > > > > > 16m(rootfs)
> > > > > > > > 
> > > > > > > > The boot partition can be used as ubi part or raw
> > > > > > > > partition.
> > > > > > > > It contains the linux dtb, u-boot and linux images.
> > > > > > > 
> > > > > > > Is that an UBIFS partition ? If so, why don't you just
> > > > > > > use
> > > > > > > two
> > > > > > > UBI
> > > > > > > volumes ?
> > > > > > 
> > > > > > For backward compatibility, it can be raw if user want to
> > > > > > stick
> > > > > > with
> > > > > > old way.
> > > > > 
> > > > > If you're breaking the partitioning layout anyway, you don't
> > > > > have
> > > > > to
> > > > > care about the "old way", right ?
> > > > 
> > > > Actually this partition can be used as raw partition if user
> > > > don't
> > > > want
> > > > to store zimage and dtb as raw binary.
> > > 
> > > You should never store raw zImage/dtb in a flash on a production
> > > system.
> > > This is real bad and can result in a corruption in the future
> > > when
> > > the
> > > system is in the field for a long time. I'd suggest to just use
> > > two
> > > UBI
> > > volumes, one for fitImage and the other for rootfs.
> > 
> > Yup, we are trying to move the raw away by having UBI enabled. I
> > presume when you refer 2 UBI volumes, I presume its still single
> > UBI
> > partition?
> 
> Yeah, one UBI partition with two UBI volumes -- boot and root.

Ok I grasp you correctly. In this case, I would suggest to opt for 2
partitions instead of 2 volumes. User can just use sf erase rootfs
instead of checking for volume offset. I suspect the ubi part will take
longer time if we are having one partition only. I shall send out the
new revision if this works for you :)

Thanks
Chin Liang