[U-Boot] [U-Boot, v2, 6/7] mtd/st_smi: Use page sizes respective to flash

[Heiko Schocher]

Hello Vipin,

Am 06.12.2012 um 09:47 schrieb Vipin Kumar:
> The page size is a flash dependent property and the driver was using a macro in
> place of page size. This patch uses the proper page size wrt the flash device
> connected on board
>
> Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
> Acked-by: Stefan Roese <sr at denx.de>
> ---
>   drivers/mtd/st_smi.c       | 41 +++++++++++++++++++++++++++++++++--------
>   include/linux/mtd/st_smi.h |  1 -
>   2 files changed, 33 insertions(+), 9 deletions(-)

I just stumbled over this old patch, it is in your patchserie:

[U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver
http://lists.denx.de/pipermail/u-boot/2012-December/141796.html

I just tried to apply this serie, but this patch fails. Is
the problem it fixes still existing? If so, could you please
rebase it and resend it?

Thanks! And sorry for the looong delay ...

bye,
Heiko
>
> diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c
> index 5f67807..0ed6c0d 100644
> --- a/drivers/mtd/st_smi.c
> +++ b/drivers/mtd/st_smi.c
> @@ -96,6 +96,25 @@ static struct flash_device flash_devices[] = {
>   };
>
>   /*
> + * get_flash_device - Return flash_device pointer for a particular device id
> + * @id:	 Device id
> + *
> + * Return flash_device pointer for a particular device id
> + */
> +static struct flash_device *get_flash_device(u32 id)
> +{
> +	struct flash_device *flash_dev_p = &flash_devices[0];
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(flash_devices); i++, flash_dev_p++) {
> +		if (flash_dev_p->device_id == id)
> +			return flash_dev_p;
> +	}
> +
> +	return NULL;
> +}
> +
> +/*
>    * smi_wait_xfer_finish - Wait until TFF is set in status register
>    * @timeout:	 timeout in milliseconds
>    *
> @@ -361,20 +380,27 @@ static int smi_sector_erase(flash_info_t *info, unsigned int sector)
>
>   /*
>    * smi_write - Write to SMI flash
> + * @info:	 flash info structure
>    * @src_addr:	 source buffer
>    * @dst_addr:	 destination buffer
>    * @length:	 length to write in bytes
> - * @bank:	 bank base address
>    *
>    * Write to SMI flash
>    */
> -static int smi_write(unsigned char *src_addr, unsigned char *dst_addr,
> -		     unsigned int length, ulong bank_addr)
> +static int smi_write(flash_info_t *info, unsigned char *src_addr,
> +		unsigned char *dst_addr, unsigned int length)
>   {
> +	struct flash_device *flash_device_p = get_flash_device(info->flash_id);
> +	u32 page_size;
>   	int banknum;
>   	int issue_we;
>
> -	switch (bank_addr) {
> +	if (!flash_device_p)
> +		return -EIO;
> +
> +	page_size = flash_device_p->pagesize;
> +
> +	switch (info->start[0]) {
>   	case SMIBANK0_BASE:
>   		banknum = BANK0;
>   		break;
> @@ -400,9 +426,9 @@ static int smi_write(unsigned char *src_addr, unsigned char *dst_addr,
>   	/* Perform the write command */
>   	while (length) {
>   		int k;
> -		unsigned int wlen = min(SFLASH_PAGE_SIZE, length);
> +		unsigned int wlen = min(page_size, length);
>
> -		if (issue_we || (((ulong)(dst_addr) % SFLASH_PAGE_SIZE) == 0)) {
> +		if (issue_we || (((ulong)(dst_addr) % page_size) == 0)) {
>   			issue_we = 0;
>
>   			if (smi_wait_till_ready(banknum,
> @@ -444,8 +470,7 @@ static int smi_write(unsigned char *src_addr, unsigned char *dst_addr,
>    */
>   int write_buff(flash_info_t *info, uchar *src, ulong dest_addr, ulong length)
>   {
> -	return smi_write(src, (unsigned char *)dest_addr, length,
> -			info->start[0]);
> +	return smi_write(info, src, (unsigned char *)dest_addr, length);
>   }
>
>   /*
> diff --git a/include/linux/mtd/st_smi.h b/include/linux/mtd/st_smi.h
> index 04f81ea..5837493 100644
> --- a/include/linux/mtd/st_smi.h
> +++ b/include/linux/mtd/st_smi.h
> @@ -108,7 +108,6 @@ struct flash_dev {
>   	ushort sector_count;
>   };
>
> -#define SFLASH_PAGE_SIZE	0x100	/* flash page size */
>   #define XFER_FINISH_TOUT	15	/* xfer finish timeout(in ms) */
>   #define WMODE_TOUT		15	/* write enable timeout(in ms) */
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany