[U-Boot] [PATCH 10/14] arm: mvebu: Don't use 0 as board ID as its used for the custom boards

[Stefan Roese]

Using board ID 0 is reserved for the non-Marvell "custom" boards. So
move the board ID's to reflect this.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Luka Perkov <luka.perkov at sartura.hr>
Cc: Phil Sutter <phil at nwl.cc>
---
 arch/arm/mach-mvebu/serdes/axp/board_env_spec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h
index 36e0ed8..f00f327 100644
--- a/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h
+++ b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h
@@ -32,7 +32,7 @@
 #define BOARD_ID_BASE			0x0
 
 /* New board ID numbers */
-#define DB_88F78XX0_BP_ID		(BOARD_ID_BASE)
+#define DB_88F78XX0_BP_ID		(BOARD_ID_BASE + 1)
 #define RD_78460_SERVER_ID		(DB_88F78XX0_BP_ID + 1)
 #define DB_78X60_PCAC_ID		(RD_78460_SERVER_ID + 1)
 #define FPGA_88F78XX0_ID		(DB_78X60_PCAC_ID + 1)
-- 
2.6.4