[U-Boot] [PATCH 1/3] dm: serial: Allow the UART driver to be dropped from the image

[Thomas Chou]

Hi Simon,

On 2015年12月14日 12:36, Simon Glass wrote:
> In very very space-constrained devices even the full UART driver is too
> large. In this case the debug UART can still be used in some cases.
>
> Add options to enable the UART driver in SPL and U-Boot proper. Enable both
> options by default.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>   drivers/serial/Kconfig         | 20 ++++++++++++++++++++
>   drivers/serial/serial-uclass.c |  2 ++
>   2 files changed, 22 insertions(+)
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 1fc287e..04541c9 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -15,6 +15,26 @@ config REQUIRE_SERIAL_CONSOLE
>   	  during serial port initialization (default y). Set this to n on
>   	  boards which have no debug serial port whatsoever.
>
> +config SERIAL_PRESENT
> +	bool "Provide a serial driver"
> +	depends on DM_SERIAL
> +	default y
> +	help
> +	  In very space-constrained devices even the full UART driver is too
> +	  large. In this case the debug UART can still be used in some cases.
> +	  This option enables the full UART in U-Boot, so if is it disabled,
> +	  the full UART driver will be omitted, thus saving space.
> +
> +config SPL_SERIAL_PRESENT
> +	bool "Provide a serial driver in SPL"
> +	depends on DM_SERIAL
> +	default y
> +	help
> +	  In very space-constrained devices even the full UART driver is too
> +	  large. In this case the debug UART can still be used in some cases.
> +	  This option enables the full UART in SPL, so if is it disabled,
> +	  the full UART driver will be omitted, thus saving space.
> +
>   config DM_SERIAL
>   	bool "Enable Driver Model for serial drivers"
>   	depends on DM
> diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
> index 4bf9a5c..95c3b91 100644
> --- a/drivers/serial/serial-uclass.c
> +++ b/drivers/serial/serial-uclass.c
> @@ -287,6 +287,7 @@ static int on_baudrate(const char *name, const char *value, enum env_op op,
>   }
>   U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
>
> +#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
>   static int serial_post_probe(struct udevice *dev)
>   {
>   	struct dm_serial_ops *ops = serial_get_ops(dev);
> @@ -356,3 +357,4 @@ UCLASS_DRIVER(serial) = {
>   	.pre_remove	= serial_pre_remove,
>   	.per_device_auto_alloc_size = sizeof(struct serial_dev_priv),
>   };
> +#endif
>

Reviewed-by: Thomas Chou <thomas at wytron.com.tw>