[U-Boot] [PATCH 5/5] drivers: net: vsc9953: Add LAG support

[Joe Hershberger]

On Tue, Dec 15, 2015 at 7:21 AM, Codrin Ciubotariu
<codrin.ciubotariu at freescale.com> wrote:
> You can now configure LAG on VSC9953's ports using the command:
> ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>}
>
> A port must belong to a single LAG. By default, a port
> belongs to a LAG equal to the port's number.
>
> For each frame, a hash will be calculated based on
> Source/Destination MAC addresses, Source/Destination IP(v4/v6)
> addresses, Source/Destination ports. This hash will be used to
> select a single egress port from LAG. This also assures
> that frames from the same flow will always have the
> same egress port.
>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>

Acked-by: Joe Hershberger <joe.hershberger at ni.com>