[U-Boot] [PATCH 07/10] net: axi_emac: Move driver to DM
Simon Glass
sjg at chromium.org
Tue Dec 15 23:34:58 CET 2015
Hi Joe,
On 15 December 2015 at 13:52, Joe Hershberger <joe.hershberger at gmail.com> wrote:
>
> Hi Simon,
>
> On Tue, Dec 15, 2015 at 12:57 PM, Simon Glass <sjg at chromium.org> wrote:
> > Hi Michal,
> >
> > On 11 December 2015 at 04:59, Michal Simek <michal.simek at xilinx.com> wrote:
> >> Move driver to DM.
> >>
> >> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> >> ---
> >>
> >> .../xilinx/microblaze-generic/microblaze-generic.c | 5 -
> >> board/xilinx/zynq/board.c | 4 -
> >> drivers/net/xilinx_axi_emac.c | 190 +++++++++++++--------
> >> include/netdev.h | 2 -
> >> 4 files changed, 122 insertions(+), 79 deletions(-)
> >
> > Reviewed-by: Simon Glass <sjg at chromium.org>
> >
> > See a few things below.
> >
> >>
> >> diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
> >> index dfa629322223..a3122da9acaa 100644
> >> --- a/board/xilinx/microblaze-generic/microblaze-generic.c
> >> +++ b/board/xilinx/microblaze-generic/microblaze-generic.c
> >> @@ -105,11 +105,6 @@ int board_eth_init(bd_t *bis)
> >> {
> >> int ret = 0;
> >>
> >> -#ifdef CONFIG_XILINX_AXIEMAC
> >> - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
> >> - XILINX_AXIDMA_BASEADDR);
> >> -#endif
> >> -
> >> #if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR)
> >> u32 txpp = 0;
> >> u32 rxpp = 0;
> >> diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
> >> index 414f5302a066..427e75485deb 100644
> >> --- a/board/xilinx/zynq/board.c
> >> +++ b/board/xilinx/zynq/board.c
> >> @@ -103,10 +103,6 @@ int board_eth_init(bd_t *bis)
> >> {
> >> u32 ret = 0;
> >>
> >> -#ifdef CONFIG_XILINX_AXIEMAC
> >> - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
> >> - XILINX_AXIDMA_BASEADDR);
> >> -#endif
> >> #ifdef CONFIG_XILINX_EMACLITE
> >> u32 txpp = 0;
> >> u32 rxpp = 0;
> >> diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
> >> index 77b1869dc9dc..c03f8f730d3a 100644
> >> --- a/drivers/net/xilinx_axi_emac.c
> >> +++ b/drivers/net/xilinx_axi_emac.c
> >> @@ -8,12 +8,15 @@
> >>
> >> #include <config.h>
> >> #include <common.h>
> >> +#include <dm.h>
> >> #include <net.h>
> >> #include <malloc.h>
> >> #include <asm/io.h>
> >> #include <phy.h>
> >> #include <miiphy.h>
> >>
> >> +DECLARE_GLOBAL_DATA_PTR;
> >> +
> >> #if !defined(CONFIG_PHYLIB)
> >> # error AXI_ETHERNET requires PHYLIB
> >> #endif
> >> @@ -87,6 +90,7 @@ struct axidma_priv {
> >> struct axidma_reg *dmarx;
> >> int phyaddr;
> >> struct axi_regs *iobase;
> >> + phy_interface_t interface;
> >> struct phy_device *phydev;
> >> struct mii_dev *bus;
> >> };
> >> @@ -218,11 +222,11 @@ static u32 phywrite(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
> >> }
> >>
> >> /* Setting axi emac and phy to proper setting */
> >> -static int setup_phy(struct eth_device *dev)
> >> +static int setup_phy(struct udevice *dev)
> >> {
> >> u16 phyreg;
> >> u32 i, speed, emmc_reg, ret;
> >> - struct axidma_priv *priv = dev->priv;
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> struct axi_regs *regs = priv->iobase;
> >> struct phy_device *phydev;
> >>
> >> @@ -298,9 +302,9 @@ static int setup_phy(struct eth_device *dev)
> >> }
> >>
> >> /* STOP DMA transfers */
> >> -static void axiemac_halt(struct eth_device *dev)
> >> +static void axiemac_halt(struct udevice *dev)
> >> {
> >> - struct axidma_priv *priv = dev->priv;
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> u32 temp;
> >>
> >> /* Stop the hardware */
> >> @@ -358,16 +362,18 @@ static int axi_ethernet_init(struct axidma_priv *priv)
> >> return 0;
> >> }
> >>
> >> -static int axiemac_setup_mac(struct eth_device *dev)
> >> +static int axiemac_setup_mac(struct udevice *dev)
> >> {
> >> - struct axi_regs *regs = (struct axi_regs *)dev->iobase;
> >> + struct eth_pdata *pdata = dev_get_platdata(dev);
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> + struct axi_regs *regs = priv->iobase;
> >>
> >> /* Set the MAC address */
> >> - int val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) |
> >> - (dev->enetaddr[1] << 8) | (dev->enetaddr[0]));
> >> + int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) |
> >> + (pdata->enetaddr[1] << 8) | (pdata->enetaddr[0]));
> >> out_be32(®s->uaw0, val);
> >>
> >> - val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ;
> >> + val = (pdata->enetaddr[5] << 8) | pdata->enetaddr[4];
> >> val |= in_be32(®s->uaw1) & ~XAE_UAW1_UNICASTADDR_MASK;
> >> out_be32(®s->uaw1, val);
> >> return 0;
> >> @@ -396,10 +402,10 @@ static void axi_dma_init(struct axidma_priv *priv)
> >> printf("%s: Timeout\n", __func__);
> >> }
> >>
> >> -static int axiemac_init(struct eth_device *dev, bd_t * bis)
> >> +static int axiemac_init(struct udevice *dev)
> >> {
> >> - struct axidma_priv *priv = dev->priv;
> >> - struct axi_regs *regs = (struct axi_regs *)dev->iobase;
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> + struct axi_regs *regs = priv->iobase;
> >> u32 temp;
> >>
> >> debug("axiemac: Init started\n");
> >> @@ -458,9 +464,9 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis)
> >> return 0;
> >> }
> >>
> >> -static int axiemac_send(struct eth_device *dev, void *ptr, int len)
> >> +static int axiemac_send(struct udevice *dev, void *ptr, int len)
> >> {
> >> - struct axidma_priv *priv = dev->priv;
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> u32 timeout;
> >>
> >> if (len > PKTSIZE_ALIGN)
> >> @@ -530,15 +536,15 @@ static int isrxready(struct axidma_priv *priv)
> >> return 0;
> >> }
> >>
> >> -static int axiemac_recv(struct eth_device *dev)
> >> +static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp)
> >> {
> >> u32 length;
> >> - struct axidma_priv *priv = dev->priv;
> >> + struct axidma_priv *priv = dev_get_priv(dev);
> >> u32 temp;
> >>
> >> /* Wait for an incoming packet */
> >> if (!isrxready(priv))
> >> - return 0;
> >> + return -1;
> >
> > I suggest -EAGAIN
> >
> >>
> >> debug("axiemac: RX data ready\n");
> >>
> >> @@ -578,77 +584,125 @@ static int axiemac_recv(struct eth_device *dev)
> >>
> >> debug("axiemac: RX completed, framelength = %d\n", length);
> >>
> >> - return length;
> >> + return 0;
> >
> > You do need to return the length here. You could update net.h to make
> > this clearer.
>
> I think I figured out what Michal is doing here. What's not clear from
> this patch is that he doesn't want net_process_received_packet() to
> run on the packet since this function already calls it directly above.
>
> He has a follow-on patch that fixes that and resumes returning the
> length from recv().
OK I see, thanks.
>
> >> }
> >>
> >> -static int axiemac_miiphy_read(const char *devname, uchar addr,
> >> - uchar reg, ushort *val)
> >> +static int axiemac_miiphy_read(struct mii_dev *bus, int addr,
> >> + int devad, int reg)
> >> {
> >> - struct eth_device *dev = eth_get_dev();
> >> - u32 ret;
> >> + int ret;
> >> + u16 value;
> >>
> >> - ret = phyread(dev->priv, addr, reg, val);
> >> - debug("axiemac: Read MII 0x%x, 0x%x, 0x%x\n", addr, reg, *val);
> >> - return ret;
> >> + ret = phyread(bus->priv, addr, reg, &value);
> >> + debug("axiemac: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg,
> >> + value, ret);
> >> + return value;
> >> }
>
> <snip>
Regards,
SImon
More information about the U-Boot
mailing list