[U-Boot] [PATCH] powerpc: Various typo fixes under arch/powerpc/cpu/mpc83xx
Robert P. J. Day
rpjday at crashcourse.ca
Wed Dec 16 18:25:42 CET 2015
Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
---
one more bit of tidying in the area of u-boot i'm actually working
in at the moment.
diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c
index 985a024..2a486e4 100644
--- a/arch/powerpc/cpu/mpc83xx/ecc.c
+++ b/arch/powerpc/cpu/mpc83xx/ecc.c
@@ -37,7 +37,7 @@ void ecc_print_status(void)
printf("Memory Error Disable:\n");
printf(" Multiple-Bit Error Disable: %d\n",
(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
+ printf(" Single-Bit Error Disable: %d\n",
(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
printf(" Memory Select Error Disable: %d\n\n",
(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
@@ -273,7 +273,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
count = simple_strtoul(argv[3], NULL, 16);
if ((u32) addr % 8) {
- printf("Address not alligned on "
+ printf("Address not aligned on "
"double word boundary\n");
return 1;
}
@@ -312,7 +312,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
count = simple_strtoul(argv[3], NULL, 16);
if ((u32) addr % 8) {
- printf("Address not alligned on "
+ printf("Address not aligned on "
"double word boundary\n");
return 1;
}
diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c
index 30606fb..c7ea94c 100644
--- a/arch/powerpc/cpu/mpc83xx/pci.c
+++ b/arch/powerpc/cpu/mpc83xx/pci.c
@@ -123,7 +123,7 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg)
int i;
if (num_buses > MAX_BUSES) {
- printf("%d PCI buses requsted, %d supported\n",
+ printf("%d PCI buses requested, %d supported\n",
num_buses, MAX_BUSES);
num_buses = MAX_BUSES;
diff --git a/arch/powerpc/cpu/mpc83xx/qe_io.c b/arch/powerpc/cpu/mpc83xx/qe_io.c
index 4fae19c..106704d 100644
--- a/arch/powerpc/cpu/mpc83xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc83xx/qe_io.c
@@ -23,7 +23,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio;
- /* Caculate pin location and 2bit mask and dir */
+ /* Calculate pin location and 2bit mask and dir */
pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index f62e1b7..21ab015 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -599,7 +599,7 @@ long int spd_sdram()
/*
* Empirically set ~MCAS-to-preamble override for DDR 2.
- * Your milage will vary.
+ * Your mileage will vary.
*/
cpo = 0;
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
@@ -843,7 +843,7 @@ long int spd_sdram()
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
- * Use timebase counter, get_timer() is not availabe
+ * Use timebase counter, get_timer() is not available
* at this point of initialization yet.
*/
static __inline__ unsigned long get_tbms (void)
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 1865626..2e91f51 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -170,7 +170,7 @@ int get_clocks(void)
tsec1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TSEC1CM value */
+ /* unknown SCCR_TSEC1CM value */
return -2;
}
#endif
@@ -191,7 +191,7 @@ int get_clocks(void)
usbdr_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_USBDRCM value */
+ /* unknown SCCR_USBDRCM value */
return -3;
}
#endif
@@ -212,7 +212,7 @@ int get_clocks(void)
tsec2_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TSEC2CM value */
+ /* unknown SCCR_TSEC2CM value */
return -4;
}
#elif defined(CONFIG_MPC8313)
@@ -239,7 +239,7 @@ int get_clocks(void)
usbmph_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_USBMPHCM value */
+ /* unknown SCCR_USBMPHCM value */
return -5;
}
@@ -266,7 +266,7 @@ int get_clocks(void)
enc_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
+ /* unknown SCCR_ENCCM value */
return -7;
}
#endif
@@ -286,7 +286,7 @@ int get_clocks(void)
sdhc_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_SDHCCM value */
+ /* unknown SCCR_SDHCCM value */
return -8;
}
#endif
@@ -305,7 +305,7 @@ int get_clocks(void)
tdm_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_TDMCM value */
+ /* unknown SCCR_TDMCM value */
return -8;
}
#endif
@@ -345,7 +345,7 @@ int get_clocks(void)
pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_PCIEXP1CM value */
+ /* unknown SCCR_PCIEXP1CM value */
return -9;
}
@@ -363,7 +363,7 @@ int get_clocks(void)
pciexp2_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_PCIEXP2CM value */
+ /* unknown SCCR_PCIEXP2CM value */
return -10;
}
#endif
@@ -383,7 +383,7 @@ int get_clocks(void)
sata_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_SATACM value */
+ /* unknown SCCR_SATA1CM value */
return -11;
}
#endif
@@ -413,7 +413,7 @@ int get_clocks(void)
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
- /* corecnf_tab_index is too high, possibly worng value */
+ /* corecnf_tab_index is too high, possibly wrong value */
return -11;
}
switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
@@ -435,7 +435,7 @@ int get_clocks(void)
core_clk = 3 * csb_clk;
break;
default:
- /* unkown core to csb ratio */
+ /* unknown core to csb ratio */
return -13;
}
diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c
index 784f4ab..845861e 100644
--- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c
@@ -47,7 +47,7 @@ void cpu_init_f (volatile immap_t * im)
(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
#endif
- /* Enable Time Base & Decrimenter (so we will have udelay()) */
+ /* Enable Time Base & Decrementer (so we will have udelay()) */
im->sysconf.spcr |= SPCR_TBEN;
/* DDR control driver register */
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
More information about the U-Boot
mailing list