[U-Boot] [PATCH v2 3/9] microblaze: Remove systemace from board file
Michal Simek
michal.simek at xilinx.com
Thu Dec 17 13:13:55 CET 2015
Systemace is ancient IP which is not tested. Remove it from default
configuration.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v2:
- Remove also from xparameters.h
board/xilinx/microblaze-generic/xparameters.h | 5 -----
include/configs/microblaze-generic.h | 15 ---------------
2 files changed, 20 deletions(-)
diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index 4f44427e601c..552aaf4fdea0 100644
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -39,11 +39,6 @@
#define XILINX_RAM_START 0x28000000
#define XILINX_RAM_SIZE 0x04000000
-/* Sysace Controller is SysACE_CompactFlash */
-#define XILINX_SYSACE_BASEADDR 0x41800000
-#define XILINX_SYSACE_HIGHADDR 0x4180ffff
-#define XILINX_SYSACE_MEM_WIDTH 16
-
/* Watchdog IP is wxi_timebase_wdt_0 */
#define XILINX_WATCHDOG_BASEADDR 0x50000000
#define XILINX_WATCHDOG_IRQ 1
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index ed7e9941a668..e88f5f852610 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -163,16 +163,6 @@
#endif /* !SPIFLASH */
#endif /* !FLASH */
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
#if defined(XILINX_USE_ICACHE)
# define CONFIG_ICACHE
#else
@@ -210,11 +200,6 @@
# undef CONFIG_CMD_CACHE
#endif
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
-#endif
-
#if defined(FLASH)
# define CONFIG_CMD_JFFS2
# define CONFIG_CMD_UBI
--
1.9.1
More information about the U-Boot
mailing list