[U-Boot] [PATCH] arm: socfpga: Fix emac1 doesn't work on socdk board

[圣江 吴]

Hi Chin,

I will check it.

Best Regards
ShengjiangWu

On Dec 17, 2015, at 11:28 PM, Chin Liang See <clsee at altera.com> wrote:

Hi Shengjiang,

On Fri, 2015-12-18 at 15:13 +0800, shengjiangwu wrote:
Updated pinmux group MIXED1IO[0-13] for RGMII1.
Updated EMAC1 clock.

Signed-off-by: shengjiangwu <shengjiangwu at icloud.com>
Cc: Chin Liang See <clsee at altera.com>
Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux at gmail.com>
Cc: Pavel Machek <pavel at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Stefan Roese <sr at denx.de>

Thanks for the patch.

---
board/altera/cyclone5-socdk/qts/pinmux_config.h | 28 +++++++++++--
----------
board/altera/cyclone5-socdk/qts/pll_config.h | 4 ++--
2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/board/altera/cyclone5-socdk/qts/pinmux_config.h
b/board/altera/cyclone5-socdk/qts/pinmux_config.h
index 33cf1fd..442b1e0 100644
--- a/board/altera/cyclone5-socdk/qts/pinmux_config.h
+++ b/board/altera/cyclone5-socdk/qts/pinmux_config.h
@@ -72,20 +72,20 @@ const u8 sys_mgr_init_table[] = {
       0, /* GENERALIO29 */
     0, /* GENERALIO30 */
 0, /* GENERALIO31 */
-  0, /* MIXED1IO0 */
-      1, /* MIXED1IO1 */
-      1, /* MIXED1IO2 */
-      1, /* MIXED1IO3 */
-      1, /* MIXED1IO4 */
-      0, /* MIXED1IO5 */
-      0, /* MIXED1IO6 */
-      0, /* MIXED1IO7 */
-      1, /* MIXED1IO8 */
-      1, /* MIXED1IO9 */
-      1, /* MIXED1IO10 */
-    1, /* MIXED1IO11 */
-        0, /* MIXED1IO12 */
-        0, /* MIXED1IO13 */
+        2, /* MIXED1IO0 */
+  2, /* MIXED1IO1 */
+      2, /* MIXED1IO2 */
+      2, /* MIXED1IO3 */
+      2, /* MIXED1IO4 */
+      2, /* MIXED1IO5 */
+      2, /* MIXED1IO6 */
+      2, /* MIXED1IO7 */
+      2, /* MIXED1IO8 */
+      2, /* MIXED1IO9 */
+      2, /* MIXED1IO10 */
+    2, /* MIXED1IO11 */
+        2, /* MIXED1IO12 */
+        2, /* MIXED1IO13 */
       0, /* MIXED1IO14 */
       1, /* MIXED1IO15 */
       1, /* MIXED1IO16 */
diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h
b/board/altera/cyclone5-socdk/qts/pll_config.h
index 3d621ed..42905f4 100644
--- a/board/altera/cyclone5-socdk/qts/pll_config.h
+++ b/board/altera/cyclone5-socdk/qts/pll_config.h
@@ -31,7 +31,7 @@
#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 79
#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 3
#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 4
#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
@@ -65,7 +65,7 @@
#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
#define CONFIG_HPS_CLK_SDRVCO_HZ 666666666
#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
-#define CONFIG_HPS_CLK_EMAC1_HZ 250000000
+#define CONFIG_HPS_CLK_EMAC1_HZ 50000000

I believe the EMAC1 clock is still 250MHz which result of 25MHz *
(79+1) / (1+1) / (3+1).

Thanks
Chin Liang

#define CONFIG_HPS_CLK_USBCLK_HZ 200000000
#define CONFIG_HPS_CLK_NAND_HZ 50000000
#define CONFIG_HPS_CLK_SDMMC_HZ 200000000