[U-Boot] [PATCH v2 3/3] arm: lpc32xx: switch SPL builds to driver model

[Vladimir Zapolskiy]

For NXP LPC32xx boards the change enables SPL_DM option, this allows
to use any driver model UART driver in SPL images, hence a restriction
on HSUART in SPL image is removed and well as definitions for non-DM
NS16550 driver, its DM version is used instead.

Because SPL_DM requires malloc(), enable CONFIG_SPL_SYS_MALLOC_SIMPLE
for LPC32xx boards.

The change adds about 5KB to the resulting SPL image (for devkit3250
board SPL image is increased from 10672 to 15608 bytes).

Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
---
Changes from v1 to v2:
* added CONFIG_SPL_SYS_MALLOC_SIMPLE to defconfigs
* removed ambiguity from a commit message

 arch/arm/cpu/arm926ejs/lpc32xx/devices.c   |  2 +-
 arch/arm/include/asm/arch-lpc32xx/config.h | 19 +------------------
 configs/devkit3250_defconfig               |  2 ++
 configs/work_92105_defconfig               |  2 ++
 4 files changed, 6 insertions(+), 19 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index 6f10186..b6db23e 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -43,7 +43,7 @@ void lpc32xx_uart_init(unsigned int uart_id)
 	       &clk->u3clk + (uart_id - 3));
 }
 
-#if !CONFIG_IS_ENABLED(OF_CONTROL) && !defined(CONFIG_SPL_BUILD)
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct ns16550_platdata lpc32xx_uart[] = {
 	{ UART3_BASE, 2, CONFIG_SYS_NS16550_CLK },
 	{ UART4_BASE, 2, CONFIG_SYS_NS16550_CLK },
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index 27e60e1..3b7f6bd 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -18,33 +18,16 @@
 /* UART configuration */
 #if	(CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
 	(CONFIG_SYS_LPC32XX_UART == 7)
-#if defined(CONFIG_SPL_BUILD)
-/* SPL images do not support LPC32xx HSUART, UART5 is selected for SPL */
-#undef CONFIG_SYS_LPC32XX_UART
-#define CONFIG_SYS_LPC32XX_UART		5
-#endif
-
 #if !defined(CONFIG_LPC32XX_HSUART)
 #define CONFIG_LPC32XX_HSUART
 #endif
 #endif
 
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-
-#define CONFIG_SYS_NS16550_COM1		UART3_BASE
-#define CONFIG_SYS_NS16550_COM2		UART4_BASE
-#define CONFIG_SYS_NS16550_COM3		UART5_BASE
-#define CONFIG_SYS_NS16550_COM4		UART6_BASE
-#endif
-
 #if !defined(CONFIG_SYS_NS16550_CLK)
 #define CONFIG_SYS_NS16550_CLK		13000000
 #endif
 
-#if !defined(CONFIG_LPC32XX_HSUART) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_LPC32XX_HSUART)
 #define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
 #else
 #define CONFIG_CONS_INDEX		CONFIG_SYS_LPC32XX_UART
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 0abb8e0..ddf09fe 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -1,5 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_DEVKIT3250=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM=y
 CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index a5a108e..1a9097a 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -1,5 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_WORK_92105=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM=y
 CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL=y
-- 
2.1.4