[U-Boot] [PATCH 1/2 v3] usb: Move determination of TT hub address/port into seperate function
Hans de Goede
hdegoede at redhat.com
Mon Dec 21 20:32:21 CET 2015
Hi,
On 20-12-15 20:12, Hans de Goede wrote:
> Hi,
>
> On 19-12-15 21:26, Stefan Brüns wrote:
>> Start split and complete split tokens need the hub address and the
>> downstream port of the first HS hub (device view).
>>
>> The core of the function was duplicated in both host/ehci_hcd and
>> musb-new/usb-compat.h.
>>
>> Signed-off-by: Stefan Brüns <stefan.bruens at rwth-aachen.de>
>> ---
>> v2: - renamed function to usb_find_usb2_hub_address_port()
>> - put musb port numbering change into seperate patch
>> v3: - do one assignement per line
>
> Thanks, I've tried to test this, but it seems that musb-new support in
> current master is broken in host mode when using hubs even when not
> adding your patch, so I need to debug that first...
>
> Note that your patch for musb-new does not even compile, you need this
> compile fix:
>
> @@ -2094,7 +2094,8 @@ int musb_urb_enqueue(
> if (tt_needed(musb, urb->dev)) {
> uint8_t portnr = 0;
> uint8_t hubaddr = 0;
> - usb_find_usb2_hub_address_port(udev, &hubaddr,
> + usb_find_usb2_hub_address_port(urb->dev,
> + &hubaddr,
> &portnr);
> qh->h_addr_reg = hubaddr;
> qh->h_port_reg = portnr - 1;
>
> But with that still things do not work (as said current master seems broken atm).
Ok, so this is caused by the addition of drivermodel support to
the keyboard layer. I've just send a patch selecting DM_KEYBOARD for
sunxi and that fixes usb-kbds not working at all with current master.
With that fixed + the above compile fix, things work.
So with the above compile fix this patch is:
Reviewed-by: Hans de Goede <hdegoede at redhat.com>
Tested-by: Hans de Goede <hdegoede at redhat.com>
Regards,
Hans
>
> Regards,
>
> Hans
>
>
>>
>> common/usb.c | 56 +++++++++++++++++++++++++++++++++++++++
>> drivers/usb/host/ehci-hcd.c | 50 ++++------------------------------
>> drivers/usb/musb-new/musb_host.c | 9 ++++---
>> drivers/usb/musb-new/usb-compat.h | 53 ------------------------------------
>> include/usb.h | 12 +++++++++
>> 5 files changed, 79 insertions(+), 101 deletions(-)
>>
>> diff --git a/common/usb.c b/common/usb.c
>> index cc79695..41efe27 100644
>> --- a/common/usb.c
>> +++ b/common/usb.c
>> @@ -1213,4 +1213,60 @@ bool usb_device_has_child_on_port(struct usb_device *parent, int port)
>> #endif
>> }
>>
>> +#ifdef CONFIG_DM_USB
>> +void usb_find_usb2_hub_address_port(struct usb_device *udev,
>> + uint8_t *hub_address, uint8_t *hub_port)
>> +{
>> + struct udevice *parent;
>> + struct usb_device *uparent, *ttdev;
>> +
>> + /*
>> + * When called from usb-uclass.c: usb_scan_device() udev->dev points
>> + * to the parent udevice, not the actual udevice belonging to the
>> + * udev as the device is not instantiated yet. So when searching
>> + * for the first usb-2 parent start with udev->dev not
>> + * udev->dev->parent .
>> + */
>> + ttdev = udev;
>> + parent = udev->dev;
>> + uparent = dev_get_parent_priv(parent);
>> +
>> + while (uparent->speed != USB_SPEED_HIGH) {
>> + struct udevice *dev = parent;
>> +
>> + if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
>> + printf("Error: Cannot find high speed parent of usb-1 device\n");
>> + *hub_address = 0;
>> + *hub_port = 0;
>> + return;
>> + }
>> +
>> + ttdev = dev_get_parent_priv(dev);
>> + parent = dev->parent;
>> + uparent = dev_get_parent_priv(parent);
>> + }
>> + *hub_address = uparent->devnum;
>> + *hub_port = ttdev->portnr;
>> +}
>> +#else
>> +void usb_find_usb2_hub_address_port(struct usb_device *udev,
>> + uint8_t *hub_address, uint8_t *hub_port)
>> +{
>> + /* Find out the nearest parent which is high speed */
>> + while (udev->parent->parent != NULL)
>> + if (udev->parent->speed != USB_SPEED_HIGH) {
>> + udev = udev->parent;
>> + } else {
>> + *hub_address = udev->parent->devnum;
>> + *hub_port = udev->portnr;
>> + return;
>> + }
>> +
>> + printf("Error: Cannot find high speed parent of usb-1 device\n");
>> + *hub_address = 0;
>> + *hub_port = 0;
>> +}
>> +#endif
>> +
>> +
>> /* EOF */
>> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
>> index c85dbce..af025de 100644
>> --- a/drivers/usb/host/ehci-hcd.c
>> +++ b/drivers/usb/host/ehci-hcd.c
>> @@ -279,56 +279,16 @@ static inline u8 ehci_encode_speed(enum usb_device_speed speed)
>> static void ehci_update_endpt2_dev_n_port(struct usb_device *udev,
>> struct QH *qh)
>> {
>> - struct usb_device *ttdev;
>> - int parent_devnum;
>> + uint8_t portnr = 0;
>> + uint8_t hubaddr = 0;
>>
>> if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL)
>> return;
>>
>> - /*
>> - * For full / low speed devices we need to get the devnum and portnr of
>> - * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs
>> - * in the tree before that one!
>> - */
>> -#ifdef CONFIG_DM_USB
>> - /*
>> - * When called from usb-uclass.c: usb_scan_device() udev->dev points
>> - * to the parent udevice, not the actual udevice belonging to the
>> - * udev as the device is not instantiated yet. So when searching
>> - * for the first usb-2 parent start with udev->dev not
>> - * udev->dev->parent .
>> - */
>> - struct udevice *parent;
>> - struct usb_device *uparent;
>> -
>> - ttdev = udev;
>> - parent = udev->dev;
>> - uparent = dev_get_parent_priv(parent);
>> -
>> - while (uparent->speed != USB_SPEED_HIGH) {
>> - struct udevice *dev = parent;
>> -
>> - if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
>> - printf("ehci: Error cannot find high-speed parent of usb-1 device\n");
>> - return;
>> - }
>> -
>> - ttdev = dev_get_parent_priv(dev);
>> - parent = dev->parent;
>> - uparent = dev_get_parent_priv(parent);
>> - }
>> - parent_devnum = uparent->devnum;
>> -#else
>> - ttdev = udev;
>> - while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH)
>> - ttdev = ttdev->parent;
>> - if (!ttdev->parent)
>> - return;
>> - parent_devnum = ttdev->parent->devnum;
>> -#endif
>> + usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr)
>>
>> - qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) |
>> - QH_ENDPT2_HUBADDR(parent_devnum));
>> + qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) |
>> + QH_ENDPT2_HUBADDR(hubaddr));
>> }
>>
>> static int
>> diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c
>> index 40b9c66..0125679 100644
>> --- a/drivers/usb/musb-new/musb_host.c
>> +++ b/drivers/usb/musb-new/musb_host.c
>> @@ -2092,9 +2092,12 @@ int musb_urb_enqueue(
>> }
>> #else
>> if (tt_needed(musb, urb->dev)) {
>> - u16 hub_port = find_tt(urb->dev);
>> - qh->h_addr_reg = (u8) (hub_port >> 8);
>> - qh->h_port_reg = (u8) (hub_port & 0xff);
>> + uint8_t portnr = 0;
>> + uint8_t hubaddr = 0;
>> + usb_find_usb2_hub_address_port(udev, &hubaddr,
>> + &portnr);
>> + qh->h_addr_reg = hubaddr;
>> + qh->h_port_reg = portnr - 1;
>> }
>> #endif
>> }
>> diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h
>> index 1c41e2a..760bd78 100644
>> --- a/drivers/usb/musb-new/usb-compat.h
>> +++ b/drivers/usb/musb-new/usb-compat.h
>> @@ -68,38 +68,6 @@ static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
>> }
>>
>> #ifdef CONFIG_DM_USB
>> -static inline u16 find_tt(struct usb_device *udev)
>> -{
>> - struct udevice *parent;
>> - struct usb_device *uparent, *ttdev;
>> -
>> - /*
>> - * When called from usb-uclass.c: usb_scan_device() udev->dev points
>> - * to the parent udevice, not the actual udevice belonging to the
>> - * udev as the device is not instantiated yet. So when searching
>> - * for the first usb-2 parent start with udev->dev not
>> - * udev->dev->parent .
>> - */
>> - ttdev = udev;
>> - parent = udev->dev;
>> - uparent = dev_get_parent_priv(parent);
>> -
>> - while (uparent->speed != USB_SPEED_HIGH) {
>> - struct udevice *dev = parent;
>> -
>> - if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
>> - printf("musb: Error cannot find high speed parent of usb-1 device\n");
>> - return 0;
>> - }
>> -
>> - ttdev = dev_get_parent_priv(dev);
>> - parent = dev->parent;
>> - uparent = dev_get_parent_priv(parent);
>> - }
>> -
>> - return (uparent->devnum << 8) | (ttdev->portnr - 1);
>> -}
>> -
>> static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev)
>> {
>> struct udevice *parent = udev->dev->parent;
>> @@ -129,27 +97,6 @@ static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev)
>> return NULL;
>> }
>> #else
>> -static inline u16 find_tt(struct usb_device *dev)
>> -{
>> - u8 chid;
>> - u8 hub;
>> -
>> - /* Find out the nearest parent which is high speed */
>> - while (dev->parent->parent != NULL)
>> - if (dev->parent->speed != USB_SPEED_HIGH)
>> - dev = dev->parent;
>> - else
>> - break;
>> -
>> - /* determine the port address at that hub */
>> - hub = dev->parent->devnum;
>> - for (chid = 0; chid < USB_MAXCHILDREN; chid++)
>> - if (dev->parent->children[chid] == dev)
>> - break;
>> -
>> - return (hub << 8) | chid;
>> -}
>> -
>> static inline struct usb_device *usb_dev_get_parent(struct usb_device *dev)
>> {
>> return dev->parent;
>> diff --git a/include/usb.h b/include/usb.h
>> index 198ecbc..2539364 100644
>> --- a/include/usb.h
>> +++ b/include/usb.h
>> @@ -875,6 +875,18 @@ int legacy_hub_port_reset(struct usb_device *dev, int port,
>>
>> int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat);
>>
>> +/*
>> + * usb_find_usb2_hub_address_port() - Get hub address and port for TT setting
>> + *
>> + * Searches for the first HS hub above the given device. If a
>> + * HS hub is found, the hub address and the port the device is
>> + * connected to is return, as required for SPLIT transactions
>> + *
>> + * @param: udev full speed or low speed device
>> + */
>> +void usb_find_usb2_hub_address_port(struct usb_device *udev,
>> + uint8_t *hub_address, uint8_t *hub_port);
>> +
>> /**
>> * usb_alloc_new_device() - Allocate a new device
>> *
>>
More information about the U-Boot
mailing list