[U-Boot] [PATCH] arm: socfpga: Enable ubi and ubifs support

[Marek Vasut]

On Monday, December 21, 2015 at 04:22:07 PM, Chin Liang See wrote:
> When QSPI and NAND is enabled, the ubi and ubifs support
> will be enabled too.
> 
> Signed-off-by: Chin Liang See <clsee at altera.com>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux at gmail.com>
> Cc: Pavel Machek <pavel at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Stefan Roese <sr at denx.de>
> ---
>  include/configs/socfpga_common.h | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h index f7c0eb5..7c50100 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -300,6 +300,15 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>  				"- at 1536k(UBI)\0"
>  #endif
> 
> +/* UBI and UBIFS support */
> +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#undef CONFIG_SPI_FLASH_USE_4K_SECTORS

This CONFIG_SPI_FLASH_USE_4K_SECTORS is Kconfig stuff, so it should go into 
configs/socfpga_* , otherwise this is fine.

> +#endif
> +
>  /*
>   * SPL
>   *

Best regards,
Marek Vasut