[U-Boot] [PATCH 2/3] imx: nand: update GPMI NAND driver to support MX7

Peng Fan van.freenix at gmail.com
Tue Dec 22 10:04:23 CET 2015


From: Peng Fan <peng.fan at nxp.com>

Update GPMI NAND driver and BCH head file to support i.MX7

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/include/asm/imx-common/regs-bch.h | 4 ++--
 drivers/mtd/nand/mxs_nand.c                | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/imx-common/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h
index 5c47783..adfbace 100644
--- a/arch/arm/include/asm/imx-common/regs-bch.h
+++ b/arch/arm/include/asm/imx-common/regs-bch.h
@@ -123,7 +123,7 @@ struct mxs_bch_regs {
 #define	BCH_FLASHLAYOUT0_NBLOCKS_OFFSET			24
 #define	BCH_FLASHLAYOUT0_META_SIZE_MASK			(0xff << 16)
 #define	BCH_FLASHLAYOUT0_META_SIZE_OFFSET		16
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	BCH_FLASHLAYOUT0_ECC0_MASK			(0x1f << 11)
 #define	BCH_FLASHLAYOUT0_ECC0_OFFSET			11
 #else
@@ -154,7 +154,7 @@ struct mxs_bch_regs {
 
 #define	BCH_FLASHLAYOUT1_PAGE_SIZE_MASK			(0xffff << 16)
 #define	BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET		16
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	BCH_FLASHLAYOUT1_ECCN_MASK			(0x1f << 11)
 #define	BCH_FLASHLAYOUT1_ECCN_OFFSET			11
 #else
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index f15cf36..ba019a0 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -30,7 +30,7 @@
 #define	MXS_NAND_DMA_DESCRIPTOR_COUNT		4
 
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE		512
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	2
 #else
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	0
@@ -152,7 +152,7 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
 	int max_ecc_strength_supported;
 
 	/* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */
-	if (is_cpu_type(MXC_CPU_MX6SX))
+	if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7))
 		max_ecc_strength_supported = 62;
 	else
 		max_ecc_strength_supported = 40;
-- 
2.6.2



More information about the U-Boot mailing list