[U-Boot] [RESEND PATCH 4/5] clk: add device tree support for clock framework
Masahiro Yamada
yamada.masahiro at socionext.com
Tue Dec 22 11:04:30 CET 2015
Add device tree binding support for the clock uclass. This allows
clock consumers to get the peripheral ID based on the "clocks"
property in the device tree.
Usage:
Assume the following device tree:
clk: myclock {
compatible = "myclocktype";
#clock-cells = <1>;
};
uart {
compatible = "myuart";
clocks = <&clk 3>;
};
i2c {
compatible = "myi2c";
clocks = <&clk 5>;
};
The UART, I2C driver can get the peripheral ID 3, 5, respectively
by calling fdt_clk_get(). The clock provider should set its get_id
callback to clk_get_id_simple. This should be enough for most cases
although more complicated DT-PeripheralID translation would be
possible by a specific get_id callback.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
drivers/clk/Makefile | 1 +
drivers/clk/clk-fdt.c | 37 +++++++++++++++++++++++++++++++++++++
include/clk.h | 20 ++++++++++++++++++++
3 files changed, 58 insertions(+)
create mode 100644 drivers/clk/clk-fdt.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4a6a4a8..5fcdf39 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -6,6 +6,7 @@
#
obj-$(CONFIG_CLK) += clk-uclass.o
+obj-$(CONFIG_$(SPL_)OF_CONTROL) += clk-fdt.o
obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
diff --git a/drivers/clk/clk-fdt.c b/drivers/clk/clk-fdt.c
new file mode 100644
index 0000000..fc53157
--- /dev/null
+++ b/drivers/clk/clk-fdt.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro at socionext.com>
+ *
+ * Device Tree support for clk uclass
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <clk.h>
+#include <dm/uclass.h>
+#include <fdtdec.h>
+
+int fdt_clk_get(const void *fdt, int nodeoffset, int index,
+ struct udevice **dev)
+{
+ struct fdtdec_phandle_args clkspec;
+ struct udevice *clkdev;
+ int rc;
+
+ rc = fdtdec_parse_phandle_with_args(fdt, nodeoffset, "clocks",
+ "#clock-cells", 0, index, &clkspec);
+ if (rc)
+ return rc;
+
+ rc = uclass_get_device_by_of_offset(UCLASS_CLK, clkspec.node, &clkdev);
+ if (rc)
+ return rc;
+
+ rc = clk_get_id(clkdev, clkspec.args_count, clkspec.args);
+ if (rc < 0)
+ return rc;
+
+ if (dev)
+ *dev = clkdev;
+
+ return rc;
+}
diff --git a/include/clk.h b/include/clk.h
index 1efbaf2..518cb47 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -121,4 +121,24 @@ static inline int clk_get_id_simple(struct udevice *dev, int args_count,
return args_count > 0 ? args[0] : 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/**
+ * fdt_clk_get() - Get peripheral ID from device tree
+ *
+ * @fdt: FDT blob
+ * @periph: Offset of clock consumer node
+ * @index: index of a phandle to parse out in "clocks" property
+ * @dev: if not NULL, filled with pointer of clock provider
+ * @return peripheral ID, or -ve error code
+ */
+int fdt_clk_get(const void *fdt, int nodeoffset, int index,
+ struct udevice **dev);
+#else
+static inline int fdt_clk_get(const void *fdt, int nodeoffset, int index,
+ struct udevice **dev);
+{
+ return -ENOSYS;
+}
+#endif
+
#endif /* _CLK_H_ */
--
1.9.1
More information about the U-Boot
mailing list