[U-Boot] [PATCH] imx: mx6sxsabresd: support emmc

[Otavio Salvador]

On Tue, Dec 22, 2015 at 7:03 AM, Peng Fan <van.freenix at gmail.com> wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> For i.MX6SX SABRESD, USDHC4 can be used for SD and EMMC, default
> it is used for SD.
>
> This patch introduces EMMC pinmux settings and a new macro
> CONFIG_MX6SXSABRESD_EMMC_REWORK. If the board has been reworked
> to support emmc, need to enable this macro.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>

Is it worth supporting this 'reworked' board? if someone reworks a
board it is expected to have to rework the BSP of it, as well.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750