[U-Boot] [PATCH 1/3] usb: gadget: dwc2_udc_otg: modified the check condition for max packet size of ep_in in high speed

[Frank Wang]

In current high speed fastboot, fs_ep_in.wMaxPacketSize is configurated 64 bytes
as default, as a result, it is failed to match the size at initialization tage in
usb controller.
Actually, hardware can support less than or equal to 512 bytes in high speed mode,
so I changed the condition from  '!=' to '>' to fix this issue.

Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
---
 drivers/usb/gadget/dwc2_udc_otg.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index ffe2952..cb20b00 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -557,8 +557,8 @@ static int dwc2_ep_enable(struct usb_ep *_ep,
 	}
 
 	/* hardware _could_ do smaller, but driver doesn't */
-	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-	     && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) !=
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK &&
+	     le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) >
 	     ep_maxpacket(ep)) || !get_unaligned(&desc->wMaxPacketSize)) {
 
 		debug("%s: bad %s maxpacket\n", __func__, _ep->name);
-- 
1.7.9.5