[U-Boot] [PATCH v1 02/18] MIPS: initial infrastructure for Microchip PIC32 architecture.
Purna Chandra Mandal
purna.mandal at microchip.com
Tue Dec 22 14:38:14 CET 2015
On 12/20/2015 04:49 AM, Daniel Schwierzeck wrote:
>
> Am 17.12.2015 um 18:28 schrieb Purna Chandra Mandal:
>> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
>> ---
>>
>> arch/mips/Kconfig | 5 ++
>> arch/mips/Makefile | 1 +
>> arch/mips/include/asm/arch-pic32/clock.h | 31 +++++++
>> arch/mips/include/asm/arch-pic32/pic32.h | 145 +++++++++++++++++++++++++++++++
>> arch/mips/mach-pic32/Kconfig | 20 +++++
>> arch/mips/mach-pic32/Makefile | 7 ++
>> arch/mips/mach-pic32/config.mk | 8 ++
>> arch/mips/mach-pic32/cpu.c | 13 +++
>> 8 files changed, 230 insertions(+)
>> create mode 100644 arch/mips/include/asm/arch-pic32/clock.h
>> create mode 100644 arch/mips/include/asm/arch-pic32/pic32.h
>> create mode 100644 arch/mips/mach-pic32/Kconfig
>> create mode 100644 arch/mips/mach-pic32/Makefile
>> create mode 100644 arch/mips/mach-pic32/config.mk
>> create mode 100644 arch/mips/mach-pic32/cpu.c
>>
>> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>> index 7f7e258..2a707e2 100644
>> --- a/arch/mips/Kconfig
>> +++ b/arch/mips/Kconfig
>> @@ -51,6 +51,10 @@ config TARGET_PB1X00
>> select SUPPORTS_CPU_MIPS32_R2
>> select SYS_MIPS_CACHE_INIT_RAM_LOAD
>>
>> +config MACH_PIC32
>> + bool "Support Microchip PIC32"
>> + select OF_CONTROL
>> + select DM
>>
>> endchoice
>>
>> @@ -59,6 +63,7 @@ source "board/imgtec/malta/Kconfig"
>> source "board/micronas/vct/Kconfig"
>> source "board/pb1x00/Kconfig"
>> source "board/qemu-mips/Kconfig"
>> +source "arch/mips/mach-pic32/Kconfig"
>>
>> if MIPS
>>
>> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
>> index 43f0f5c..8b7c7e3 100644
>> --- a/arch/mips/Makefile
>> +++ b/arch/mips/Makefile
>> @@ -8,3 +8,4 @@ libs-y += arch/mips/cpu/
>> libs-y += arch/mips/lib/
>>
>> libs-$(CONFIG_SOC_AU1X00) += arch/mips/mach-au1x00/
>> +libs-$(CONFIG_MACH_PIC32) += arch/mips/mach-pic32/
>> diff --git a/arch/mips/include/asm/arch-pic32/clock.h b/arch/mips/include/asm/arch-pic32/clock.h
>> new file mode 100644
>> index 0000000..6a4270d
>> --- /dev/null
>> +++ b/arch/mips/include/asm/arch-pic32/clock.h
>> @@ -0,0 +1,31 @@
>> +/*
>> + * (c) 2015 Purna Chandra Mandal purna.mandal at microchip.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + *
>> + */
>> +
>> +#ifndef __PIC32_CLOCK_H_
>> +#define __PIC32_CLOCK_H_
>> +
>> +/* clk */
>> +enum {
>> + BASECLK,
>> + PLLCLK,
>> + MPLL,
>> + SYSCLK,
>> + PB1CLK,
>> + PB2CLK,
>> + PB3CLK,
>> + PB4CLK,
>> + PB5CLK,
>> + PB6CLK,
>> + PB7CLK,
>> + REF1CLK,
>> + REF2CLK,
>> + REF3CLK,
>> + REF4CLK,
>> + REF5CLK,
>> +};
>> +
>> +#endif /* __PIC32_CLOCK_H_ */
>> diff --git a/arch/mips/include/asm/arch-pic32/pic32.h b/arch/mips/include/asm/arch-pic32/pic32.h
>> new file mode 100644
>> index 0000000..4f2084f
>> --- /dev/null
>> +++ b/arch/mips/include/asm/arch-pic32/pic32.h
>> @@ -0,0 +1,145 @@
>> +/*
>> + * (c) 2015 Paul Thacker <paul.thacker at microchip.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + *
>> + */
>> +
>> +#ifndef __PIC32_REGS_H__
>> +#define __PIC32_REGS_H__
>> +
>> +#define _CLR_OFFSET (0x4)
>> +#define _SET_OFFSET (0x8)
>> +#define _INV_OFFSET (0xc)
>> +
>> +/* System Configuration */
>> +#define PIC32_CFG_BASE(x) 0xbf800000
> you should a base address as physical address as seen by the CPU (e.g.
> 0x1f800000). The driver then does a remap to KSEG1. But if you use
> device-tree, you should get base address and size of a register space
> from there. Example:
>
> void __iomem *base = (void __iomem *)CKSEG1ADDR(PIC32_CFG_BASE)
ack. will update.
>> +#define CFGCON (PIC32_CFG_BASE(x))
>> +#define DEVID (PIC32_CFG_BASE(x) + 0x0020)
>> +#define SYSKEY (PIC32_CFG_BASE(x) + 0x0030)
>> +#define PMD1 (PIC32_CFG_BASE(x) + 0x0040)
>> +#define PMD7 (PIC32_CFG_BASE(x) + 0x00a0)
>> +#define CFGEBIA (PIC32_CFG_BASE(x) + 0x00c0)
>> +#define CFGEBIC (PIC32_CFG_BASE(x) + 0x00d0)
>> +#define CFGPG (PIC32_CFG_BASE(x) + 0x00e0)
>> +#define CFGMPLL (PIC32_CFG_BASE(x) + 0x0100)
> registers should only defined by their relative offset. The addition to
> the base address is not needed. A driver could do:
>
> readl(base + CFGCON)
ack.
>> +
>> +/* Clock & Reset */
>> +#define RESET_BASE 0xbf800000
>> +
>> +/* Non Volatile Memory (NOR flash) */
>> +#define PIC32_NVM_BASE (RESET_BASE + 0x0600)
>> +
>> +/* Reset Control Registers */
>> +#define RSWRST (RESET_BASE + 0x1250)
>> +
>> +/* Oscillator Configuration */
>> +#define OSCCON (RESET_BASE + 0x1200)
>> +#define SPLLCON (RESET_BASE + 0x1220)
>> +#define REFO1CON (RESET_BASE + 0x1280)
>> +#define REFO1TRIM (RESET_BASE + 0x1290)
>> +#define PB1DIV (RESET_BASE + 0x1340)
>> +
>> +/* Peripheral PORTA-PORTK / PORT0-PORT9 */
>> +enum {
>> + PIC32_PORT_A = 0,
>> + PIC32_PORT_B = 1,
>> + PIC32_PORT_C = 2,
>> + PIC32_PORT_D = 3,
>> + PIC32_PORT_E = 4,
>> + PIC32_PORT_F = 5,
>> + PIC32_PORT_G = 6,
>> + PIC32_PORT_H = 7,
>> + PIC32_PORT_J = 8, /* no PORT_I */
>> + PIC32_PORT_K = 9,
>> + PIC32_PORT_MAX
>> +};
>> +
>> +/* Peripheral Pin Select Input */
>> +#define PPS_IN_BASE 0xbf800000
>> +#define U1RXR (PPS_IN_BASE + 0x1468)
>> +#define U2RXR (PPS_IN_BASE + 0x1470)
>> +#define SDI1R (PPS_IN_BASE + 0x149c)
>> +#define SDI2R (PPS_IN_BASE + 0x14a8)
>> +
>> +/* Peripheral Pin Select Output */
>> +#define PPS_OUT_BASE 0xbf801500
>> +#define PPS_OUT(prt, pi)(PPS_OUT_BASE + ((((prt) * 16) + (pi)) << 2))
>> +#define RPA14R PPS_OUT(PIC32_PORT_A, 14)
>> +#define RPB0R PPS_OUT(PIC32_PORT_B, 0)
>> +#define RPB14R PPS_OUT(PIC32_PORT_B, 14)
>> +#define RPD0R PPS_OUT(PIC32_PORT_D, 0)
>> +#define RPD3R PPS_OUT(PIC32_PORT_D, 3)
>> +#define RPG8R PPS_OUT(PIC32_PORT_G, 8)
>> +#define RPG9R PPS_OUT(PIC32_PORT_G, 9)
>> +
>> +/* Peripheral Pin Control */
>> +#define PINCTRL_BASE(x) (0xbf860000 + (x * 0x0100))
>> +#define ANSEL(x) (PINCTRL_BASE(x) + 0x00)
>> +#define ANSELCLR(x) (ANSEL(x) + _CLR_OFFSET)
>> +#define ANSELSET(x) (ANSEL(x) + _SET_OFFSET)
>> +#define TRIS(x) (PINCTRL_BASE(x) + 0x10)
>> +#define TRISCLR(x) (TRIS(x) + _CLR_OFFSET)
>> +#define TRISSET(x) (TRIS(x) + _SET_OFFSET)
>> +#define PORT(x) (PINCTRL_BASE(x) + 0x20)
>> +#define PORTCLR(x) (PORT(x) + _CLR_OFFSET)
>> +#define PORTSET(x) (PORT(x) + _SET_OFFSET)
>> +#define LAT(x) (PINCTRL_BASE(x) + 0x30)
>> +#define LATCLR(x) (LAT(x) + _CLR_OFFSET)
>> +#define LATSET(x) (LAT(x) + _SET_OFFSET)
>> +#define ODC(x) (PINCTRL_BASE(x) + 0x40)
>> +#define ODCCLR(x) (ODC(x) + _CLR_OFFSET)
>> +#define ODCSET(x) (ODC(x) + _SET_OFFSET)
>> +#define CNPU(x) (PINCTRL_BASE(x) + 0x50)
>> +#define CNPUCLR(x) (CNPU(x) + _CLR_OFFSET)
>> +#define CNPUSET(x) (CNPU(x) + _SET_OFFSET)
>> +#define CNPD(x) (PINCTRL_BASE(x) + 0x60)
>> +#define CNPDCLR(x) (CNPD(x) + _CLR_OFFSET)
>> +#define CNPDSET(x) (CNPD(x) + _SET_OFFSET)
>> +#define CNCON(x) (PINCTRL_BASE(x) + 0x70)
>> +#define CNCONCLR(x) (CNCON(x) + _CLR_OFFSET)
>> +#define CNCONSET(x) (CNCON(x) + _SET_OFFSET)
>> +
>> +/* Get gpio# from peripheral port# and pin# */
>> +#define GPIO_PORT_PIN(_port, _pin) \
>> + (((_port) << 4) + (_pin))
>> +
>> +/* USB Core */
>> +#define PIC32_USB_CORE_BASE 0xbf8e3000
>> +#define PIC32_USB_CTRL_BASE 0xbf884000
>> +
>> +/* SPI1-SPI6 */
>> +#define PIC32_SPI1_BASE 0xbf821000
>> +
>> +/* Prefetch Module */
>> +#define PREFETCH_BASE 0xbf8e0000
>> +#define PRECON (PREFETCH_BASE)
>> +#define PRECONCLR (PRECON + _CLR_OFFSET)
>> +#define PRECONSET (PRECON + _SET_OFFSET)
>> +#define PRECONINV (PRECON + _INV_OFFSET)
>> +
>> +#define PRESTAT (PREFETCH_BASE + 0x0010)
>> +#define PRESTATCLR (PRESTAT + _CLR_OFFSET)
>> +#define PRESTATSET (PRESTAT + _SET_OFFSET)
>> +#define PRESTATINV (PRESTAT + _INV_OFFSET)
>> +
>> +/* DDR2 Controller */
>> +#define PIC32_DDR2C_BASE 0xbf8e8000
>> +
>> +/* DDR2 PHY */
>> +#define PIC32_DDR2P_BASE 0xbf8e9100
>> +
>> +/* EBI */
>> +#define PIC32_EBI_BASE 0xbf8e1000
>> +
>> +/* SQI */
>> +#define PIC32_SQI_BASE 0xbf8e2000
>> +
>> +struct pic32_reg_atomic {
>> + u32 raw;
>> + u32 clr;
>> + u32 set;
>> + u32 inv;
>> +};
>> +
>> +#endif /* __PIC32_REGS_H__ */
>> diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
>> new file mode 100644
>> index 0000000..e4eaf5c
>> --- /dev/null
>> +++ b/arch/mips/mach-pic32/Kconfig
>> @@ -0,0 +1,20 @@
>> +menu "Microchip PIC32 platforms"
>> + depends on MACH_PIC32
>> +
>> +config SYS_SOC
>> + default "none"
>> +
>> +choice
>> + prompt "PIC32 SoC select"
>> +
>> +endchoice
>> +
>> +choice
>> + prompt "Board select"
>> +
>> +endchoice
>> +
>> +config PIC32_SUPPORTS_FDT_BOOT
>> + bool "FDT Boot"
>> +
>> +endmenu
>> diff --git a/arch/mips/mach-pic32/Makefile b/arch/mips/mach-pic32/Makefile
>> new file mode 100644
>> index 0000000..cb42607
>> --- /dev/null
>> +++ b/arch/mips/mach-pic32/Makefile
>> @@ -0,0 +1,7 @@
>> +# (C) Copyright 2015
>> +# Purna Chandra Mandal, purna.mandal at microchip.com.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +
>> +obj-y = cpu.o
>> diff --git a/arch/mips/mach-pic32/config.mk b/arch/mips/mach-pic32/config.mk
>> new file mode 100644
>> index 0000000..f17a3f4
>> --- /dev/null
>> +++ b/arch/mips/mach-pic32/config.mk
>> @@ -0,0 +1,8 @@
>> +#
>> +# (C) Copyright 2011
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +
>> +PLATFORM_CPPFLAGS += -mtune=m14kec
> config.mk files are deprecated, so please do not create a new one. Such
> flags should be added with a cpuflags-$(xxx) line in arch/mips/config.mk
ack.
>> diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
>> new file mode 100644
>> index 0000000..58fd3ab
>> --- /dev/null
>> +++ b/arch/mips/mach-pic32/cpu.c
>> @@ -0,0 +1,13 @@
>> +/*
>> + * Copyright (C) 2015
>> + * Purna Chandra Mandal <purna.mandal at microchip.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + *
>> + */
>> +#include <common.h>
>> +
>> +phys_size_t initdram(int board_type)
>> +{
>> + return 0;
>> +}
>>
More information about the U-Boot
mailing list