[U-Boot] [PATCH 1/6] arm: socfpga: cyclone5-socdk: Enabling mtd partitioning layout

[Marek Vasut]

On Tuesday, December 22, 2015 at 05:00:42 PM, Chin Liang See wrote:
> On Tue, 2015-12-22 at 16:53 +0100, Marek Vasut wrote:
> > On Tuesday, December 22, 2015 at 04:49:54 PM, Chin Liang See wrote:
> > > On Fri, 2015-12-18 at 14:10 +0100, Marek Vasut wrote:
> > > > On Friday, December 18, 2015 at 10:39:12 AM, Chin Liang See
> > > 
> > > > wrote:
> > > [..]
> > > 
> > > > > > I will send that patch out shortly, but I think there is
> > > > > > something
> > > > > > else
> > > > > > going on. I am starting to suspect something with the L3
> > > > > > interconnect.
> > > > > > Maybe some R/W reordering or something like that in NIC301 .
> > > > > > 
> > > > > > Are you able to replicate my USB issue with mainline on
> > > > > > socfpga ?
> > > > > > What
> > > > > > happens if you run usb reset with a USB stick plugged in?
> > > > > > What
> > > > > > compiler
> > > > > > version do you use ?
> > > > > 
> > > > > I tried that few weeks back and it works for me. FYI, I am
> > > > > using
> > > > > the
> > > > > mentor toolchain "arm-altera-eabi" that come with SOCEDS. Maybe
> > > > > I
> > > > > can
> > > > > try again with your toolchain.
> > > > 
> > > > I am using the unreleased ELDK 5.8 (gcc 4.9.2) and debian gcc
> > > > 5.2.
> > > > Which gcc version is in the mentor toolchain?
> > > 
> > > Mine is Sourcery CodeBench Lite 2015.05-11 (gcc 4.9.2 also)
> > > 
> > > > Can you try it again with u-boot/master ? I'd be interested in
> > > > your
> > > > results.
> > > > Can you share the entire output of the U-Boot and run 'dcache'
> > > > command before
> > > > doing 'usb reset' ? I am seeing this issue with Sandisk Cruzer
> > > > USB
> > > > 2.0 sticks
> > > > now too.
> > > 
> > > I can do that but git clone will take some time
> > 
> > You can use git fetch in your current repo.
> > 
> > I started wondering how you're testing the CV SoCDK, since I
> > discovered just
> > this morning that it doesn't even boot (I already sent patches to fix
> > that).
> 
> I presume you are referring to SPL? FYI, I am still using the SPL from
> SOCEDS while using latest U-Boot from mainstream. That's why I didn't
> the issue noticed by Shengjiang and you.

Well, at least you're honest ... but *sigh*, it'd be nice if you tested
mainline only, really.

> But will make the switch soon once done with few in progress patches
> for U-Boot.

I will collect the remaining patches today and see how socdk fares.

Best regards,
Marek Vasut