[U-Boot] [PATCH v2 3/4] sf: Read back and check once macronix quad bit set
Mugunthan V N
mugunthanvnm at ti.com
Wed Dec 23 10:15:55 CET 2015
On Wednesday 23 December 2015 01:51 PM, Jagan Teki wrote:
> On 23 December 2015 at 13:22, Mugunthan V N <mugunthanvnm at ti.com> wrote:
>> On Wednesday 16 December 2015 02:31 PM, Jagan Teki wrote:
>>> One macronix quad bit set using SR, it's good to
>>> read back and check the written bit and also if
>>> it's already been set check for the bit and return.
>>>
>>> Cc: Vignesh R <vigneshr at ti.com>
>>> Cc: Mugunthan V N <mugunthanvnm at ti.com>
>>> Cc: Simon Glass <sjg at chromium.org>
>>> Cc: Bin Meng <bmeng.cn at gmail.com>
>>> Signed-off-by: Jagan Teki <jteki at openedev.com>
>>> ---
>>> Changes for v2:
>>> - none
>>>
>>> drivers/mtd/spi/spi_flash.c | 18 ++++++++++++------
>>> 1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
>>> index ba6651e..c922322 100644
>>> --- a/drivers/mtd/spi/spi_flash.c
>>> +++ b/drivers/mtd/spi/spi_flash.c
>>> @@ -840,12 +840,18 @@ static int macronix_quad_enable(struct spi_flash *flash)
>>> if (ret < 0)
>>> return ret;
>>>
>>> - if (qeb_status & STATUS_QEB_MXIC) {
>>> - debug("SF: mxic: QEB is already set\n");
>>> - } else {
>>> - ret = write_sr(flash, STATUS_QEB_MXIC);
>>> - if (ret < 0)
>>> - return ret;
>>> + if (qeb_status & STATUS_QEB_MXIC)
>>> + return 0;
>>> +
>>> + ret = write_sr(flash, STATUS_QEB_MXIC);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + /* read SR and check it */
>>> + ret = read_sr(flash, &qeb_status);
>>> + if (!(ret > 0 && (qeb_status & STATUS_QEB_MXIC))) {
>>
>> This error check is wrong, it can be either one of the below
>>
>> if (!(ret >= 0 && (qeb_status & STATUS_QEB_MXIC))) {
>
> So =0 is a success case, this is what you pointing to correct? did you
> test this?
Yeah, I have tested this on am437x-sk evm.
The same fix has to be done for spansion flash as well!
Regards
Mugunthan V N
More information about the U-Boot
mailing list