[U-Boot] [PATCH v5 08/16] drivers: spi: ti_qspi: convert driver to adopt device driver model
Mugunthan V N
mugunthanvnm at ti.com
Wed Dec 23 10:59:14 CET 2015
adopt ti_qspi driver to device driver model
Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
drivers/spi/ti_qspi.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 187 insertions(+)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 36d3193..78d8b13 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -11,11 +11,14 @@
#include <asm/arch/omap.h>
#include <malloc.h>
#include <spi.h>
+#include <dm.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
#include <asm/omap_common.h>
#include <asm/ti-common/ti-edma3.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ti qpsi register bit masks */
#define QSPI_TIMEOUT 2000000
#define QSPI_FCLK 192000000
@@ -48,12 +51,14 @@
#define CORE_CTRL_IO 0x4a002558
#define QSPI_CMD_READ (0x3 << 0)
+#define QSPI_CMD_READ_DUAL (0x6b << 0)
#define QSPI_CMD_READ_QUAD (0x6b << 0)
#define QSPI_CMD_READ_FAST (0x0b << 0)
#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8)
#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
+#define QSPI_SETUP0_READ_DUAL (0x1 << 12)
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
#define QSPI_CMD_WRITE (0x2 << 16)
#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
@@ -87,7 +92,13 @@ struct ti_qspi_regs {
/* ti qspi priv */
struct ti_qspi_priv {
+#ifndef CONFIG_DM_SPI
struct spi_slave slave;
+#else
+ void *memory_map;
+ uint max_hz;
+ u32 num_cs;
+#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
unsigned int mode;
@@ -288,6 +299,8 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len)
}
#endif
+#ifndef CONFIG_DM_SPI
+
static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
{
return container_of(slave, struct ti_qspi_priv, slave);
@@ -401,3 +414,177 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
priv->slave.bus, priv->slave.cs, bitlen, flags);
return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
}
+
+#else /* CONFIG_DM_SPI */
+
+static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
+ struct spi_slave *slave,
+ bool enable)
+{
+ u32 memval;
+ u32 mode = slave->mode_rx & (SPI_RX_QUAD | SPI_RX_DUAL);
+
+ if (!enable) {
+ writel(0, &priv->base->setup0);
+ return;
+ }
+
+ memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
+
+ switch (mode) {
+ case SPI_RX_QUAD:
+ memval |= QSPI_CMD_READ_QUAD;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ memval |= QSPI_SETUP0_READ_QUAD;
+ slave->mode_rx = SPI_RX_QUAD;
+ break;
+ case SPI_RX_DUAL:
+ memval |= QSPI_CMD_READ_DUAL;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ memval |= QSPI_SETUP0_READ_DUAL;
+ break;
+ default:
+ memval |= QSPI_CMD_READ;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
+ memval |= QSPI_SETUP0_READ_NORMAL;
+ break;
+ }
+
+ writel(memval, &priv->base->setup0);
+}
+
+
+static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+
+ ti_spi_set_speed(priv, max_hz);
+
+ return 0;
+}
+
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
+{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+ return __ti_qspi_set_mode(priv, mode);
+}
+
+static int ti_qspi_claim_bus(struct udevice *dev)
+{
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (slave_plat->cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
+ }
+
+ __ti_qspi_setup_memorymap(priv, slave, true);
+
+ return __ti_qspi_claim_bus(priv, slave_plat->cs);
+}
+
+static int ti_qspi_release_bus(struct udevice *dev)
+{
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ __ti_qspi_setup_memorymap(priv, slave, false);
+ __ti_qspi_release_bus(priv);
+
+ return 0;
+}
+
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (slave->cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
+ }
+
+ return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+}
+
+static int ti_qspi_probe(struct udevice *bus)
+{
+ /* Nothing to do in probe */
+ return 0;
+}
+
+static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+ const void *blob = gd->fdt_blob;
+ int node = bus->of_offset;
+ fdt_addr_t addr;
+
+ priv->base = (struct ti_qspi_regs *)dev_get_addr(bus);
+ priv->memory_map = (void *)dev_get_addr_index(bus, 1);
+ addr = dev_get_addr_index(bus, 2);
+ priv->ctrl_mod_mmap = (addr == FDT_ADDR_T_NONE) ? NULL : (void *)addr;
+
+ priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
+ if (priv->max_hz < 0) {
+ debug("Error: Max frequency missing\n");
+ return -ENODEV;
+ }
+ priv->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
+
+ debug("%s: regs=<0x%x>, max-frequency=%d\n", __func__,
+ (int)priv->base, priv->max_hz);
+
+ return 0;
+}
+
+static int ti_qspi_child_pre_probe(struct udevice *dev)
+{
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+
+ slave->memory_map = priv->memory_map;
+ return 0;
+}
+
+static const struct dm_spi_ops ti_qspi_ops = {
+ .claim_bus = ti_qspi_claim_bus,
+ .release_bus = ti_qspi_release_bus,
+ .xfer = ti_qspi_xfer,
+ .set_speed = ti_qspi_set_speed,
+ .set_mode = ti_qspi_set_mode,
+};
+
+static const struct udevice_id ti_qspi_ids[] = {
+ { .compatible = "ti,dra7xxx-qspi" },
+ { .compatible = "ti,am4372-qspi" },
+ { }
+};
+
+U_BOOT_DRIVER(ti_qspi) = {
+ .name = "ti_qspi",
+ .id = UCLASS_SPI,
+ .of_match = ti_qspi_ids,
+ .ops = &ti_qspi_ops,
+ .ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
+ .probe = ti_qspi_probe,
+ .child_pre_probe = ti_qspi_child_pre_probe,
+};
+#endif /* CONFIG_DM_SPI */
--
2.7.0.rc1.5.gf3adf45
More information about the U-Boot
mailing list