[U-Boot] [PATCH 1/7] include/configs: make secure boot header file include uniform
Aneesh Bansal
aneesh.bansal at freescale.com
Wed Dec 23 15:55:07 CET 2015
The file fsl_secure_boot.h must be included in config file
for Secure Boot. This is not required to be protected by any
macro.
CONFIG_FSL_CAAM must be defined and CONFIG_CMD_HASH should be
turned on.
The above was missing in some config files and all files have been
made uniform in this respect.
Signed-off-by: Aneesh Bansal <aneesh.bansal at freescale.com>
---
include/configs/C29XPCIE.h | 4 ++++
include/configs/T102xQDS.h | 12 +++++++++++-
include/configs/T102xRDB.h | 12 +++++++++++-
include/configs/T1040QDS.h | 3 ++-
include/configs/T104xRDB.h | 3 ++-
include/configs/T208xQDS.h | 3 ++-
include/configs/T208xRDB.h | 3 ++-
include/configs/ls1021aqds.h | 5 ++++-
include/configs/ls1021atwr.h | 5 ++++-
include/configs/ls1043a_common.h | 8 ++++++++
include/configs/ls1043ardb.h | 6 ++----
11 files changed, 52 insertions(+), 12 deletions(-)
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 16920c6..890dcbb 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -567,4 +567,8 @@
#include <asm/fsl_secure_boot.h>
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 951cbc4..fb41a7d 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -39,6 +39,8 @@
#define CONFIG_BOARD_EARLY_INIT_F
#endif
+#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
+
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
@@ -936,8 +938,16 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
#endif
#endif /* __T1024QDS_H */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 4a0f5b2..113df37 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -33,6 +33,8 @@
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
+
/* support deep sleep */
#ifdef CONFIG_PPC_T1024
#define CONFIG_DEEP_SLEEP
@@ -948,8 +950,16 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
#endif
#endif /* __T1024RDB_H */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 9e151da..5fd93a1 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -835,8 +835,9 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
#endif
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index da65f56..eec2971 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -938,8 +938,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
#endif
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index a0cecc6..019878a 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -933,8 +933,9 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
#undef CONFIG_CMD_USB
#endif
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 312b0eb..3665b7d 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -889,8 +889,9 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-#ifdef CONFIG_SECURE_BOOT
#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
#undef CONFIG_CMD_USB
#endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 2e8dbc7..0f1ad21 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -660,12 +660,15 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MISC_INIT_R
/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
#define CONFIG_CMD_HASH
#define CONFIG_SHA_HW_ACCEL
+#endif
+
+#include <asm/fsl_secure_boot.h>
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
-#include <asm/fsl_secure_boot.h>
#endif
#endif
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index c12ba3a..d368cf2 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -516,12 +516,15 @@
#define CONFIG_MISC_INIT_R
/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
#define CONFIG_CMD_HASH
#define CONFIG_SHA_HW_ACCEL
+#endif
+
+#include <asm/fsl_secure_boot.h>
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
-#include <asm/fsl_secure_boot.h>
#endif
#endif
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 677d281..e80ac27 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -197,6 +197,8 @@
#define CONFIG_DOS_PARTITION
#endif
+#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
+
/* FMan ucode */
#define CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_SYS_DPAA_FMAN
@@ -252,4 +254,10 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
#endif /* __LS1043A_COMMON_H */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 585114f..ed8a65f 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -291,14 +291,12 @@
#define CONFIG_CMD_EXT2
#endif
+#include <asm/fsl_secure_boot.h>
+
#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
#define CONFIG_CMD_BLOB
/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */
#define CONFIG_ESBC_ADDR_64BIT
#endif
-#include <asm/fsl_secure_boot.h>
-
#endif /* __LS1043ARDB_H__ */
--
1.8.1.4
More information about the U-Boot
mailing list