[U-Boot] [PATCH v6 01/16] drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver model conversion
Mugunthan V N
mugunthanvnm at ti.com
Wed Dec 23 16:02:48 CET 2015
Changing the ti_qspi_priv structure and its instance names from
to priv for driver mode conversion.
Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
Reviewed-by: Jagan Teki <jteki at openedev.com>
---
drivers/spi/ti_qspi.c | 120 +++++++++++++++++++++++++-------------------------
1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index d5a06b8..a9f996d 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -85,8 +85,8 @@ struct ti_qspi_regs {
u32 data3;
};
-/* ti qspi slave */
-struct ti_qspi_slave {
+/* ti qspi priv */
+struct ti_qspi_priv {
struct spi_slave slave;
struct ti_qspi_regs *base;
unsigned int mode;
@@ -94,14 +94,14 @@ struct ti_qspi_slave {
u32 dc;
};
-static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave)
+static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
{
- return container_of(slave, struct ti_qspi_slave, slave);
+ return container_of(slave, struct ti_qspi_priv, slave);
}
-static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
+static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
{
- struct spi_slave *slave = &qslave->slave;
+ struct spi_slave *slave = &priv->slave;
u32 memval = 0;
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
@@ -123,12 +123,12 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
QSPI_NUM_DUMMY_BITS;
#endif
- writel(memval, &qslave->base->setup0);
+ writel(memval, &priv->base->setup0);
}
static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
uint clk_div;
debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
@@ -139,8 +139,8 @@ static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
clk_div = (QSPI_FCLK / hz) - 1;
/* disable SCLK */
- writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN,
- &qslave->base->clk_ctrl);
+ writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
+ &priv->base->clk_ctrl);
/* assign clk_div values */
if (clk_div < 0)
@@ -149,7 +149,7 @@ static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
clk_div = QSPI_CLK_DIV_MAX;
/* enable SCLK */
- writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl);
+ writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -165,11 +165,11 @@ void spi_cs_activate(struct spi_slave *slave)
void spi_cs_deactivate(struct spi_slave *slave)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
- writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd);
+ writel(priv->cmd | QSPI_INVAL, &priv->base->cmd);
/* dummy readl to ensure bus sync */
readl(&qslave->base->cmd);
}
@@ -182,73 +182,73 @@ void spi_init(void)
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
- struct ti_qspi_slave *qslave;
+ struct ti_qspi_priv *priv;
#ifdef CONFIG_AM43XX
gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
#endif
- qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
- if (!qslave) {
- printf("SPI_error: Fail to allocate ti_qspi_slave\n");
+ priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
+ if (!priv) {
+ printf("SPI_error: Fail to allocate ti_qspi_priv\n");
return NULL;
}
- qslave->base = (struct ti_qspi_regs *)QSPI_BASE;
- qslave->mode = mode;
+ priv->base = (struct ti_qspi_regs *)QSPI_BASE;
+ priv->mode = mode;
- ti_spi_set_speed(&qslave->slave, max_hz);
+ ti_spi_set_speed(&priv->slave, max_hz);
#ifdef CONFIG_TI_SPI_MMAP
- ti_spi_setup_spi_register(qslave);
+ ti_spi_setup_spi_register(priv);
#endif
- return &qslave->slave;
+ return &priv->slave;
}
void spi_free_slave(struct spi_slave *slave)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
- free(qslave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
+ free(priv);
}
int spi_claim_bus(struct spi_slave *slave)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
- qslave->dc = 0;
- if (qslave->mode & SPI_CPHA)
- qslave->dc |= QSPI_CKPHA(slave->cs);
- if (qslave->mode & SPI_CPOL)
- qslave->dc |= QSPI_CKPOL(slave->cs);
- if (qslave->mode & SPI_CS_HIGH)
- qslave->dc |= QSPI_CSPOL(slave->cs);
+ priv->dc = 0;
+ if (priv->mode & SPI_CPHA)
+ priv->dc |= QSPI_CKPHA(slave->cs);
+ if (priv->mode & SPI_CPOL)
+ priv->dc |= QSPI_CKPOL(slave->cs);
+ if (priv->mode & SPI_CS_HIGH)
+ priv->dc |= QSPI_CSPOL(slave->cs);
- writel(qslave->dc, &qslave->base->dc);
- writel(0, &qslave->base->cmd);
- writel(0, &qslave->base->data);
+ writel(priv->dc, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
- writel(0, &qslave->base->dc);
- writel(0, &qslave->base->cmd);
- writel(0, &qslave->base->data);
+ writel(0, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
- struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
uint words = bitlen >> 3; /* fixed 8-bit word length */
const uchar *txp = dout;
uchar *rxp = din;
@@ -264,7 +264,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
/* Setup mmap flags */
if (flags & SPI_XFER_MMAP) {
- writel(MM_SWITCH, &qslave->base->memswitch);
+ writel(MM_SWITCH, &priv->base->memswitch);
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
val = readl(CORE_CTRL_IO);
val |= MEM_CS(slave->cs);
@@ -272,7 +272,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
#endif
return 0;
} else if (flags & SPI_XFER_MMAP_END) {
- writel(~MM_SWITCH, &qslave->base->memswitch);
+ writel(~MM_SWITCH, &priv->base->memswitch);
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
val = readl(CORE_CTRL_IO);
val &= MEM_CS_UNSELECT;
@@ -290,12 +290,12 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
}
/* Setup command reg */
- qslave->cmd = 0;
- qslave->cmd |= QSPI_WLEN(8);
- qslave->cmd |= QSPI_EN_CS(slave->cs);
- if (qslave->mode & SPI_3WIRE)
- qslave->cmd |= QSPI_3_PIN;
- qslave->cmd |= 0xfff;
+ priv->cmd = 0;
+ priv->cmd |= QSPI_WLEN(8);
+ priv->cmd |= QSPI_EN_CS(slave->cs);
+ if (priv->mode & SPI_3WIRE)
+ priv->cmd |= QSPI_3_PIN;
+ priv->cmd |= 0xfff;
/* FIXME: This delay is required for successfull
* completion of read/write/erase. Once its root
@@ -307,39 +307,39 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
while (words--) {
if (txp) {
debug("tx cmd %08x dc %08x data %02x\n",
- qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
- writel(*txp++, &qslave->base->data);
- writel(qslave->cmd | QSPI_WR_SNGL,
- &qslave->base->cmd);
- status = readl(&qslave->base->status);
+ priv->cmd | QSPI_WR_SNGL, priv->dc, *txp);
+ writel(*txp++, &priv->base->data);
+ writel(priv->cmd | QSPI_WR_SNGL,
+ &priv->base->cmd);
+ status = readl(&priv->base->status);
timeout = QSPI_TIMEOUT;
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
if (--timeout < 0) {
printf("spi_xfer: TX timeout!\n");
return -1;
}
- status = readl(&qslave->base->status);
+ status = readl(&priv->base->status);
}
debug("tx done, status %08x\n", status);
}
if (rxp) {
- qslave->cmd |= QSPI_RD_SNGL;
+ priv->cmd |= QSPI_RD_SNGL;
debug("rx cmd %08x dc %08x\n",
- qslave->cmd, qslave->dc);
+ priv->cmd, priv->dc);
#ifdef CONFIG_DRA7XX
udelay(500);
#endif
- writel(qslave->cmd, &qslave->base->cmd);
- status = readl(&qslave->base->status);
+ writel(priv->cmd, &priv->base->cmd);
+ status = readl(&priv->base->status);
timeout = QSPI_TIMEOUT;
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
if (--timeout < 0) {
printf("spi_xfer: RX timeout!\n");
return -1;
}
- status = readl(&qslave->base->status);
+ status = readl(&priv->base->status);
}
- *rxp++ = readl(&qslave->base->data);
+ *rxp++ = readl(&priv->base->data);
debug("rx done, status %08x, read %02x\n",
status, *(rxp-1));
}
--
2.7.0.rc1.5.gf3adf45
More information about the U-Boot
mailing list