[U-Boot] [PATCH v4 0/8] add support for atheros ath79 based SOCs
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Sat Dec 26 14:00:51 CET 2015
Hi Wills,
please take care of following suggestions in your next patch series:
Always respond to comments by reviewers, either by acknowledging a
suggested change or by rejecting it with an explanation why the
suggested change is not appropriate. Also tell them in advance which
changes you are going to make. Maintain a change history per patch.
Do not send too much patch series consecutively. Give reviewers some
time (several days) to review or respond to a new patch series. Keep in
mind that there currently are holidays in Europe and North-America and a
lot of maintainers/custodians are not available because of it.
Try to use patman for maintaining and submitting your patch series.
Patman makes it easier for you to maintain change histories, commit
notes, cover letters and so on.
Am 25.12.2015 um 19:56 schrieb Wills Wang:
> These series of patch add support for atheros ath79 based SOCs in u-boot,
> at the present moment it's just available for ar933x chip.
>
> Changes in v4:
> - Add div64 macro for MIPS
> - Convert physical address to uncached and cached(KSEG0/1) memory range
> in map_physmem
> - Auto calculate baudrate for serial driver
> - Move pinctrl code in serial driver into arch/mips/mach-ath79
> - Use global_data to save CPU/DDR/AHB clock
> - Use get_serial_clock to serial clock source
> - Use get_bus_freq instead of hardcode in SPI driver
> - Use arch_global_data to save SOC's type, revison and id
> - move CPU optimize tuning flag from config.mk to Kconfig
>
> Changes in v3:
> - Convert serial driver to driver model
> - Convert spi driver to driver model
> - Add support for device tree
> - Move SoC specific header files into arch/mips/mach-ath79/include/mach
> - Optimize assembly code
> - Same code style convertion
>
> Changes in v2:
> - Move all SoC specific header files into arch/mips/include/asm/arch-ath79
> - Check SOC type and extract common code into arch/mips/mach-ath79
> - Add a compatible spi driver
> - Move serial driver code into drivers/serial
> - Add a reference board implemention
>
> Wills Wang (8):
> include: Add support for "do_div" macro
> mips: implement to access the KSEG0/1 memory range in map_physmem
> mips: add base support for atheros ath79 based SOCs
> mips: ath79: add serial driver for ar933x SOC
> mips: ath79: add spi driver
> mips: ath79: add AP121 reference board
> mips: support optimize tuning for same common processor cores
> mips: move optimize tuning option from deprecated config.mk to Kconfig
>
> arch/mips/Kconfig | 17 +
> arch/mips/Makefile | 8 +
> arch/mips/dts/Makefile | 2 +-
> arch/mips/dts/ap121.dts | 37 +
> arch/mips/dts/ar933x.dtsi | 64 ++
> arch/mips/include/asm/div64.h | 68 ++
> arch/mips/include/asm/global_data.h | 5 +
> arch/mips/include/asm/io.h | 7 +-
> arch/mips/mach-ath79/Makefile | 9 +
> arch/mips/mach-ath79/ar933x/Makefile | 8 +
> arch/mips/mach-ath79/ar933x/clk.c | 86 ++
> arch/mips/mach-ath79/ar933x/cpu.c | 32 +
> arch/mips/mach-ath79/ar933x/ddr_tap.S | 268 +++++
> arch/mips/mach-ath79/ar933x/lowlevel_init.S | 460 ++++++++
> arch/mips/mach-ath79/cpu.c | 171 +++
> arch/mips/mach-ath79/dram.c | 27 +
> arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 1144 ++++++++++++++++++++
> arch/mips/mach-ath79/include/mach/ath79.h | 143 +++
> arch/mips/mach-ath79/include/mach/ddr.h | 13 +
> arch/mips/mach-ath79/reset.c | 46 +
> board/ath79/ap121/Kconfig | 15 +
> board/ath79/ap121/MAINTAINERS | 6 +
> .../config.mk => board/ath79/ap121/Makefile | 4 +-
> board/ath79/ap121/README | 18 +
> board/ath79/ap121/ap121.c | 17 +
> board/ath79/ap121/config.mk | 16 +
> configs/ap121_defconfig | 42 +
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_ar933x.c | 225 ++++
> drivers/spi/Kconfig | 8 +
> drivers/spi/Makefile | 1 +
> drivers/spi/ath79_spi.c | 211 ++++
> include/asm-generic/div64.h | 59 +
> include/configs/ap121.h | 82 ++
> 34 files changed, 3315 insertions(+), 5 deletions(-)
> create mode 100644 arch/mips/dts/ap121.dts
> create mode 100644 arch/mips/dts/ar933x.dtsi
> create mode 100644 arch/mips/include/asm/div64.h
> create mode 100644 arch/mips/mach-ath79/Makefile
> create mode 100644 arch/mips/mach-ath79/ar933x/Makefile
> create mode 100644 arch/mips/mach-ath79/ar933x/clk.c
> create mode 100644 arch/mips/mach-ath79/ar933x/cpu.c
> create mode 100644 arch/mips/mach-ath79/ar933x/ddr_tap.S
> create mode 100644 arch/mips/mach-ath79/ar933x/lowlevel_init.S
> create mode 100644 arch/mips/mach-ath79/cpu.c
> create mode 100644 arch/mips/mach-ath79/dram.c
> create mode 100644 arch/mips/mach-ath79/include/mach/ar71xx_regs.h
> create mode 100644 arch/mips/mach-ath79/include/mach/ath79.h
> create mode 100644 arch/mips/mach-ath79/include/mach/ddr.h
> create mode 100644 arch/mips/mach-ath79/reset.c
> create mode 100644 board/ath79/ap121/Kconfig
> create mode 100644 board/ath79/ap121/MAINTAINERS
> rename arch/mips/mach-au1x00/config.mk => board/ath79/ap121/Makefile (65%)
> create mode 100644 board/ath79/ap121/README
> create mode 100644 board/ath79/ap121/ap121.c
> create mode 100644 board/ath79/ap121/config.mk
> create mode 100644 configs/ap121_defconfig
> create mode 100644 drivers/serial/serial_ar933x.c
> create mode 100644 drivers/spi/ath79_spi.c
> create mode 100644 include/asm-generic/div64.h
> create mode 100644 include/configs/ap121.h
>
--
- Daniel
More information about the U-Boot
mailing list