[U-Boot] [PATCH v5 4/5] mips: ath79: add spi driver

Marek Vasut marex at denx.de
Tue Dec 29 14:25:27 CET 2015


On Tuesday, December 29, 2015 at 02:00:27 PM, Thomas Chou wrote:
> Hi Wills,
> 
> On 2015年12月29日 19:17, Wills Wang wrote:
> > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
> > index 1d92a5b..b5668e9 100644
> > --- a/arch/mips/mach-ath79/Kconfig
> > +++ b/arch/mips/mach-ath79/Kconfig
> > @@ -15,6 +15,7 @@ config SOC_AR933X
> > 
> >   	select SYS_MIPS_CACHE_INIT_RAM_LOAD
> >   	select MIPS_TUNE_24KC
> >   	select AR933X_UART
> > 
> > +	select ATH79_SPI
> 
> Both AR933X_UART and ATH79_SPI should not be selected with mach Kconfig.
> They should go with board defconfig.
> 
> > diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c
> > 
> > +static inline void ath79_spi_delay(int max_hz)
> > +{
> > +	uint64_t tick = get_tbclk();
> > +
> > +	do_div(tick, max_hz);
> > +	tick = get_ticks() + tick + 1;	/* get current timestamp */
> > +	while (get_ticks() < tick)	/* loop till event */
> > +		 /*NOP*/;
> > +}
> 
> Use udelay() instead.

You mean get_timer() based delay loop, yes ?

Best regards,
Marek Vasut


More information about the U-Boot mailing list