[U-Boot] [PATCH v5 4/5] mips: ath79: add spi driver

[Wills Wang]

On 12/29/2015 09:25 PM, Marek Vasut wrote:
> On Tuesday, December 29, 2015 at 02:00:27 PM, Thomas Chou wrote:
>> Hi Wills,
>>
>> On 2015年12月29日 19:17, Wills Wang wrote:
>>> diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
>>> index 1d92a5b..b5668e9 100644
>>> --- a/arch/mips/mach-ath79/Kconfig
>>> +++ b/arch/mips/mach-ath79/Kconfig
>>> @@ -15,6 +15,7 @@ config SOC_AR933X
>>>
>>>    	select SYS_MIPS_CACHE_INIT_RAM_LOAD
>>>    	select MIPS_TUNE_24KC
>>>    	select AR933X_UART
>>>
>>> +	select ATH79_SPI
>> Both AR933X_UART and ATH79_SPI should not be selected with mach Kconfig.
>> They should go with board defconfig.
>>
>>> diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c
>>>
>>> +static inline void ath79_spi_delay(int max_hz)
>>> +{
>>> +	uint64_t tick = get_tbclk();
>>> +
>>> +	do_div(tick, max_hz);
>>> +	tick = get_ticks() + tick + 1;	/* get current timestamp */
>>> +	while (get_ticks() < tick)	/* loop till event */
>>> +		 /*NOP*/;
>>> +}
>> Use udelay() instead.
> You mean get_timer() based delay loop, yes ?

Does get_timer() return time in milliseconds?

> Best regards,
> Marek Vasut
>

-- 
Best Regards
Wills