[U-Boot] [PATCH 3/8] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
Bin Meng
bmeng.cn at gmail.com
Thu Dec 31 09:53:05 CET 2015
LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
configs/colibri_vf_defconfig | 1 +
configs/colibri_vf_dtb_defconfig | 1 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
configs/ls1021aqds_nor_lpuart_defconfig | 1 +
configs/ls1021atwr_nor_lpuart_defconfig | 1 +
configs/pcm052_defconfig | 1 +
configs/vf610twr_defconfig | 1 +
configs/vf610twr_nand_defconfig | 1 +
drivers/serial/Kconfig | 6 ++++++
include/configs/colibri_vf.h | 1 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/pcm052.h | 1 -
include/configs/vf610twr.h | 1 -
14 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index f8441e3..45917c8 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y
CONFIG_DM=y
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
index 3596cec..b1a843a 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 68bd117..44b2a0d 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
# CONFIG_CMD_SETEXPR is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index b2f6832..1186af2 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
# CONFIG_CMD_SETEXPR is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index d7afca9..58cd61f 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
# CONFIG_CMD_SETEXPR is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
index 9125645..26ab733 100644
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index dc8df5c..d51c93b 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index 98880f3..299fa8f 100644
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SPI_FLASH=y
+CONFIG_FSL_LPUART=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1fc287e..3b54511 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -186,6 +186,12 @@ config ALTERA_UART
Select this to enable an UART for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
+config FSL_LPUART
+ bool "Freescale LPUART support"
+ help
+ Select this to enable a Low Power UART for Freescale VF610 and
+ QorIQ Layerscape devices.
+
config SYS_NS16550
bool "NS16550 UART or compatible"
help
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 708c79a..5aed3a5 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -36,7 +36,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_FSL_LPUART
#define LPUART_BASE UART0_BASE
/* Allow to overwrite serial and ethaddr */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 2e8dbc7..e8b1eca 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
* Serial Port
*/
#ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
#define CONFIG_LPUART_32B_REG
#else
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index bbef2a7..317ba62 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -266,7 +266,6 @@
* Serial Port
*/
#ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
#define CONFIG_LPUART_32B_REG
#else
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index b851bba..891bdb0 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -27,7 +27,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_FSL_LPUART
#define LPUART_BASE UART1_BASE
/* Allow to overwrite serial and ethaddr */
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 34df6f0..dcfafaf 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -34,7 +34,6 @@
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_FSL_LPUART
#define LPUART_BASE UART1_BASE
/* Allow to overwrite serial and ethaddr */
--
1.8.2.1
More information about the U-Boot
mailing list