[U-Boot] [PATCH v3 04/10] sf: Use sf_params in sandbox

[Jagan Teki]

sandbox.c is using sf_params, so move sf_params.o
to sandbox build.

Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Mugunthan V N <mugunthanvnm at ti.com>
Tested-by: Jagan Teki <jteki at openedev.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
 drivers/mtd/spi/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index c665836..20d32c1 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
 obj-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
 endif
 
-obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o sf_params.o sf.o
+obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o sf.o
 obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
 obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
-obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
+obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o sf_params.o
-- 
1.9.1